Matek introduces the FCHUB-12S power wiring board for large XCLASS quadcopters ranging in size from 800mm to 1200mm.
The FCHUB-12S has many useful features such as wide input voltage range up to 60V, BEC outputs at 5V and 12V, accurate current meter up to 440A. This PDB can handle up to 12S LiPo and has a total continuous current rating of 280A and a pulse current rating of 440A.
Just like the other Matek FCHUB series distribution boards, this board is designed to be solderless connected to STD series controllers via an FFC ribbon loop. If you intend to use third party controllers, you can use the 5V or 12V outputs of this board to power any other device.
PDB Features
Input voltage range: 8 ~ 60V (3 ~ 12S LiPo)
Operating current: 4 x 70A (max. 4 x 110A)
Current sensor: 440A, 3.3V ADC, scale 75
2 LED indicators for 5V, 12V
Mounting holes: 30.5 x 30.5mm, M3
Dimensions: 55 x 50 x 6mm
Weight: 21g
Connection to flight controller
Loop output for Matek F405-STD / F722-STD controller
VTX output for video transmitter
T5 and R5 outputs for TX5 and RX5 outputs on F405-STD / F722-STD
BEC 5V Characteristics
Voltage: 5V +/- 0.1 DC
Continuous current: 5A (max. 6A)
Permissible short circuit: 2 seconds
Overcurrent protection and self-recovery
BEC 12V Characteristics
Voltage: 12V +/- 0.2 DC (input voltage >= 12V)
Continuous current: 4A (max. 5A)
Input voltage <12V
Output voltage = Input voltage
Possible audible alarm when voltage <12V is applied.
Brand: MatekSKU 13704
Reviews and discussions
There are no messages yet. Leave your message first.
Registration