SpeedyBee F405 WING is a newly introduced, first flight controller of the SpeedyBee brand for flying wings. A model that is currently one of the most competitive in the budget category, while still having a wide range of features and rich bundling.
The F405 Wing flight stack consists of three separate boards: a power distribution board (PDB), a flight controller board, and a wireless communication board. The package includes various wires, mounting parts, pin connectors, and a detailed manual with helpful wiring diagrams. You will also receive a set of cables for various connections for seamless integration with your flying wing.
The SpeedyBee F405 WING is built on a 168MHz STM32 F405 chipset with 1MB of memory and works with both iNav and Ardupilot, making it versatile and suitable for a variety of aircraft models. Among other things, the flight stack supports up to 11 PWM outputs for motor and servo control and 6 UART ports for connecting to accessories such as GPS, etc.
This flight stack has several unique features, namely a built-in battery voltage indicator with LEDs, four separate LED ports with built-in driver, and built-in Wi-Fi and Bluetooth connectivity. The Wi-Fi and Bluetooth features allow the SpeedyBee F405 WING to connect wirelessly to your phone or computer, making it easy to make modifications and important firmware changes in the field.
Features
Wireless programming via the SpeedyBee app
Support for various types of flying wings, including VTOL.
I2C port: 1x Used for magnetometer, digital air speed sensor
ADC ports: 4x (VBAT, Current, RSSI, Analog AirSpeed)
PWM outputs: 12x (11+1 "LED "pad)
ELRS/CRSF receiver: Supported, connected to UART1
SBUS: Built-in inverter for SBUS input (UART2-RX)
LEDs:
3 LEDs for flight controller status (blue, green) and 3.3V indicator (red)
1 RGB diode
RSSI input: Yes (signed as RS).
Firmware support:
INAV:SpeedyBeeF405WING(default)
ArduPilot: SpeedyBeeF405WING
Weight: 8.9g
SpeedyBee F405 WING PDB board
Input voltage range: 7~36V (2~6S LiPo)
Battery voltage sensor: Connection to VBAT flight controller board, 1K:10K (scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor: Connection on "FC Current" board, Scale 195 in iNav, 50 A/V in ArduPilot
90A continuous current,
peak current 215A.
TVS protection: Yes
BEC Outputs:
FC Output 5.2V +/- 0.1V DC. Continuous current - 2.4A, peak current - 3A. Designed for flight controller, receiver, GPS module, airspeed sensor module, telemetry module, WS2812 LEDs
VTX output 9V +/- 0.1V DC. Continuous current is 1.8A, peak current is 2.3A Adjustable voltage, 9V default, 12V or 5V with jumper. Designed for analog video transmitter, digital video transmitter, camera
Servo output 4.9V +/- 0.1V DC. 4.5A continuous current, 5.5A peak current, Adjustable voltage: 4.9V default, 6V or 7.2V with jumper. Designed for servo drives.
Weight: 11.4g
SpeedyBee F405 WING Wireless board
Wireless configuration (long press the BOOT button for 6 seconds to switch modes):
BLE mode, connection to Speedybee app
Wi-Fi mode, connection to QGroundControl app, Speedybee app, MissionPlanner, etc.
Classic Bluetooth SPP mode, connection to QGroundControl, MissionPlanner, etc.
LED strip controller (short press BOOT button to switch effects, long press for 3 seconds to switch modes):
4 WS2812 LED strip connectors, customizable colors and flashing modes
Maximum 5.2V 1.3A, supports about 70 5050 WS2812 LEDs.
Brand: SpeedyBeeSKU 17126
Reviews and discussions
There are no messages yet. Leave your message first.
Registration