Experience new possibilities with the SpeedyBee F405 V4 BLS 60A 30x30 FC&ESC universal stack. Compact and lightweight, with a USBType-Cport and DSHOT300/600 ESC protocol, it is the perfect choice for the most common FPV drone builds. Compatible with the DJI Air Unit, RunCam Link, Caddx Vista, and DJI O3, making it easy to integrate with FPV systems, this stack is suitable for both BetaFlight and INAV firmware. The use of the MaxLinear LDO chip and ICM42688P gyroscope with isolated power supply minimizes electrical interference, and the 1000uF capacitor improves signal filtering. The built-in Bluetooth module allows you to change flight settings via the SpeedyBee mobile app without connecting to a PC. Optional support for SD cards up to 32GB provides storage of flight data for detailed analysis.
Features
STM32F405 processor provides fast data processing, complemented by increased copper thickness on the board (3 oz.) for efficient current management
Supports 60A continuous current with up to 320A peak load due to upgraded MOSFET transistors, aluminum heat sink, and TVS diode protection
Fully compatible connector for connecting DJI Air Unit, RunCam Link, Caddx Vista and DJI O3 without the need to change wiring
MaxLinear LDO chip for isolated power supply of the ICM42688P gyro, which reduces electrical interference, and filtering with a 1000uF capacitor
Bluetooth module for setting up and changing flight parameters, including the direction of rotation of the motors, via the SpeedyBee app
Supports SD cards up to 32GB
Specifications
SpeedyBee F405 V4 30x30 flight controller
Processor: STM32F405
Gyroscope IMU: ICM42688P
Barometer: built-in
OSD Chip: AT7456E
BLE Bluetooth: supported
Wi-Fi: not supported
DJI Air Unit connection method: two methods are supported: 6-pin connector or direct soldering
DJI Air Unit 6-pin plug: supported, compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1
MicroSD Blackbox: SDHC up to 4GB
Current sensor input: supported (for SpeedyBee BLS 60A ESC, scale = 400 and offset = 0)
Reviews and discussions
There are no messages yet. Leave your message first.
Registration