RadioMaster TX16S Hall 2.4G 16CH Mode2 radio control equipment

The RadioMaster TX16S Hall radio control unit combines the best features of today's transmitters. Super smooth high-precision sticks with Hall sensor and aluminum faceplate, 4" color display with touch control support, USB-C port for battery charging, ergonomic design with convenient key layout and menu navigation, standardized built-in multiprotocol module, external SD port for writing LUA scripts, UART ports for functionality expansion, 16 control channels, full support for OpenTX firmware and much more.

Built-in multiprotocol RF-system 4 in 1 includes such popular RF-modules as CC2500, NRF24L01, A7105 and CYRF6936, which allows you to use a variety of receivers from different manufacturers such as FrSky, FlySky, Futaba and others.

Also in RadioMaster TX16S Hall supports the use of external long-range modules TBS Crossfire Micro, FrSky R9M. They are connected using a special compartment with a 5-pin connector JR and to use it is necessary to change the priority from internal to external module in the console settings.

The company RadioMaster supports the development of firmware OpenTX and continues to actively work on the introduction of new technologies with new versions of firmware. For example, RadioMaster originally made the display with the possibility of using touch control, which appeared in the firmware version OpenTX 2.4.

High-quality Hall sensor sticks with aluminum faceplate provide smooth and accurate response, as well as have an unlimited lifespan.

The T16S features a bright and crisp 4.3" color display with adjustable brightness for any environment. Simple and easy to set up model control using the color-coded menu.

TX16S features built-in charging with USB-C control system for charging 2S 7.4V Li-ion 18650 or Li-Polymer batteries. The built-in charger features over-current protection and temperature sensors to ensure safe charging.

The radio comes in a high density impact resistant polyurethane foam case, ideal for safe storage and transportation of the RadioMaster TX16S Hall.

Note: the TBS Crossfire Micro module shown in some pictures is not included.

MKIIversion difference: new sticks on Hall sensors version 4.0; additional grips; built-in speaker on both sides

• Full-size, high-quality Hall-sensor sticks with aluminum faceplate
• Built-in 4-in-1 multiprotocol module:
  • Cypress Semiconductor CYRF6936: DSM / DSMX, Walkera Devo
  • Texas Instruments CC2500: FrSky (ACCST protocol only), Futabas SFHSS
  • Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
  • Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and many others
• Improved bay for using external JR modules such as TBS Crossfire Micro, Frsky R9M
• Support Full Speed Native TBS Crossfire (400K)
• Bright 4.3-inch color screen with 480 x 272 pixel resolution, with touch control capability (starting with OpenTX 2.4 firmware)
• Full integration with OpenTX firmware and future updates
• Telemetry support (depends on the receiver used)
• USB-C connector for connection to PC as simulator and for updates
• USB-C charging of dual-cell Li-ion 18650 or LiPo batteries. Maximum charging current 1.5A
• External UART ports to expand capabilities
• Built-in memory 16Mb. Includes 256Mb memory card (can be expanded with Micro SD card)
• 6 buttons for quick switching between radio-controlled models
• Voice alerts and vibrating tactile feedback system
• Three-color LED status indicator
• Menu navigation with aluminum wheel button

• Version: FCC (international)
• Processor: STM32F429BIT6
• Frequency: 2.4G
• Number of channels: 16CH
• Type: Mode2 (throttle lever on the left)
• Firmware: OpenTX
• Display: Color, 4x3 inches, 480x272px (touch screen when upgrading OpenTX firmware to 2.4)
• Operating current: 350mA at 8.4V
• Operating voltage: 5.5-18V
• External Micro SD slot: Yes
• External UART expansion ports: 2
• Built-in 4-in-1 multiprotocol module: compatible with FlySky, FrSky (ACCST), Hubsan, Futaba, Syma and others.
• Recommended battery: 2 x 18650 Li-ion or LiPo 2S batteries
• Battery compartment size ： 25 x 52 x 97mm
• Size: 212 x 183 x 66mm
• Weight: 902g (with battery)

• 1 x RadioMaster TX16S Hall radio control equipment
• 1 x EPP carrying case
• 1 x stick springs
• 1 x USB-C cable
• 1 x 18650 battery tray
• 1 x Micro SD 256Mb memory card (already installed)
• 1 x user manual
• Attention! Batteries are not included in the package.