Matek F405-STD flight controller with built-in barometer

New version of the F405-STD flight controller from Matek. The main difference from the previous version F405-OSD, is the presence of a built-in barometer BMP280 (I2C). It is compatible with Matek FCHUB-6S / FCHUB-VTX / FCHUB-W power strip board via 16pin cable.

• MCU: 168MHz F405 STM32F405RGT6
• Gyroscope chip: ICM20602 with 32kHz and 16kHz PID Loop / accelerometer (SPI) support
• Barometer: BMP280 (I2C)
• OSD: BetaFlight OSD with AT7456E chip
• Blackbox: MicroSD card slot (SD / SDHC)
• VCP, UART1, UART2, UART3, UART4, UART5
• Built-in inverter for SBUS input (UART2-RX)
• PPM / UART Shared: UART2-RX
• SoftSerial on TX2, S5 or S6 (optional)
• Camera control on S6 or DAC (optional)
• SmartAudio & Tramp VTX protocol supported
• Battery voltage sensor: 1:10
• Current Sensor: None (optional FCHUB-6S, FCHUB-VTX, FCHUB-W)
• BEC 5V: No (Option FCHUB-6S, FCHUB-VTX, FCHUB-W)
• LDO 3.3V: Max. 300 mA
• I2C1 SDA & SCL: Yes
• WS2812 Led Strip: Yes
• Beeper: Yes
• RSSI: Yes
• Loop: 16pin
• Loop length: 5cm
• Fitting holes: 30.5mm
• Size: 36x36mm
• Weight: 7g

• 1x Matek F405-STD flight controller
• 1x set of damper bolts for controller
• 2x 16pin stubs for connecting the power distribution board