Matek FCHUB-6S distribution board with 184A current sensor and dual 5V and 10V BECs

Matek 's new FCHUB-6S distribution board has been specifically designed for easy and quick connection via a 16 pin daisy chain to the Matek F405-OSD flight controller, with no extra wires. The PDB distributes power from LiPo to 4 ESCs, and provides synchronized and regulated 5V and 10V outputs to power cameras, RC receivers, flight controllers, video transmitters, LEDs, etc. There is also a built-in 184A current sensor on the board.

• Current sensor up to 184 Amps
• Quality 2oz copper contact pads in 4 layers
• Two power supplies - 5V and 10V
• LED power indicators
• Short circuit tolerance

• Input voltage: 3S-6S 9 - 27VDC
• Current carrying capacity per channel: 4x30A (Max.4x35A)
• Current Sensor: 184A, 3.3V
• Output voltage: 10V / 5V, error 2.5%

• BEC 5V
• Output Voltage: 5.0 +/- 0.1VDC
• Continuous current: 1.5A(Peak current 2A 10 sec.). 100uF Panasonic capacitor at the output
• Short circuit tolerance: 2 sec/minute

• BEC 10V
• Output voltage: 10.0 +/- 0.2VDC
• Continuous current: 1.5A(Peak current 2A 10 sec.). 47uF TDK capacitor at the output
• Short circuit tolerance: 2 seconds/minute

• Loop: 16pin
• Dimensions: 46 x 36 x 4 mm
• Fitting holes M3 (30.5mm)
• Weight: 8.7g

• 1x Distribution board
• 1x Set of nylon posts