Flight control stack SEQURE H743 V2 FC E130/E160 G2 ESC 4-12S 130A/160A

SEQURE H743 V2 FC E130/E160 G2 ESC flight control stack uses the powerful H743 V2 flight controller based on the high-performance STM32H743 processor with an operating frequency of up to 480MHz. It offers excellent response speed and is equipped with an ICM-42688-P gyroscope that guarantees precise stabilization and reliable control. It has a built-in barometer, OSD and 16MB Blackbox for easy recording of flight data. It offers 6 UART ports to meet different connection needs and two BEC outputs for 5V/2.5A and 10V/2A. Supports up to 8 motors, making an X8 configuration possible. It is powered by 4-8S Lipo/LiHV batteries and is ideal for installation in a wide range of systems thanks to its 20mm and 30.5mm mounting holes.

The E130 G2 or E160 G2speed controller provides a choice of 130A/160A continuous current and 220A/280A peak current respectively. Both versions are equipped with a 32-bit STM32G071 processor and support BLHEli_32 or AM32 firmware. The controller also has a built-in ammeter, supports telemetry transmission, and allows for real-time transmission of motor speed, temperature, current, and other parameters. The mounting holes measuring 30.5*30.5mm facilitate easy installation and wide compatibility.

• High-performance STM32H743 processor with a frequency of 480MHz
• Built-in ICM-42688-P gyroscope, barometer, OSD and Blackbox with 16MB flash memory
• 6 UART ports and 2 BEC outputs 5V/2.5A and 10V/2A
• Can control up to 8 motors, allowing for various configurations
• Two versions of speed controller with 130A or 160A continuous current
• Supports AM32/BLHEli_32 firmware and Dshot, PWM, Oneshot, Multishot, etc. protocols
• Convenient installation with 20mm and 30.5mm mounting holes

H743 V2 flight controller

• Processor: STM32H743
• Frequency: 480MHz
• Gyroscope: ICM-42688-P
• Barometer: BMP280/DPS310/DPS368
• OSD: AT7456E
• Blackbox: 16MB
• Firmware types: Betaflight (default), INAV, ArduPilot
• Firmware name: SEQUREH7V2
• Input voltage: 4-8S Lipo/LiHV
• BEC outputs: 5V/2.5A, 10V/2A
• UARTS ports: 6
• Motor control: M1-M8
• LED: WS2812 LED Strip
• Buzzer: supported
• ESC telemetry: RX8
• USB: Type-C
• Mounting holes: 20*20mm, Φ4mm; 30.5*30.5mm, Φ4mm
• Dimensions: 36.5*36.5*6mm
• Weight: 7.3g

E130/E160 G2 speed controller

• Processor: STM32G071
• Input voltage: 4-12S (14-53V) Lipo / LiHV
• Continuous current:
  
  • E130 G2: 130A
  • E160 G2: 160A
• Peak current:
  
  • E130 G2: 220A
  • E160 G2: 280A
• Firmware: AM32/BLHeli_32
• Supported protocols: Dshot (all), PWM, Oneshot, Multishot, etc.
• Telemetry feedback: yes
• Galvanometer: yes
• BEC: 16V 2A
• Mounting holes: 30.5*30.5mm, Φ4mm/M3
• Size:
  
  • E130 G2: 54*57*7mm
  • E160 G2: 54*57*10mm
• Weight:
  
  • E130 G2: 43g
  • E160 G2: 66g

• 1 x SEQURE H743 V2 FC flight controller
• 1 x E130/E160 G2 ESC speed controller (optional)
• 2 x 63V 1200UF capacitor
• 1 x male connector XT60H-M
• 10 x silicone shock absorbing washer M3*10mm (black)
• 4 x M3*30mm screw
• 3 x M3 nylon nut
• 2 x 8AWG 150mm power cable (black/red)
• 1 x 30AWG 40mm flat cable with SH1.0-8P reverse double-sided plug
• 2 x 30AWG 100mm flat cable with single SH1.0-4P plug
• 1 x 12095 5V booster 60mm long