Matek has released a new version of the LED & Power Hub 5 in 1 V3 power distribution board that works as a power hub. The board has 5V backs, 12V backs, an LED backlight controller, a seek function and a low voltage alarm.
The V3 differs from the past version with 2oz copper tracks for more load carrying capacity. In this version, the VECs work independently of each other.
Features
1 function: Power wiring board
4-layer power strip board for 4 ESCs
Continuous current: 20A per output
Maximum current: 25A per output (10 seconds)
2 function:
BEC 5V.
5V output for receivers, flight controllers, OSD, etc.
DC/DC synchronous stabilizer with efficiency up to 95%
Voltage: 5V
Continuous current: 3A
BEC 12V
Linear regulator, low interference
12V output for cameras, video transmitters, etc.
Voltage: 12V
Continuous current: 500mA at 16V, 250mA at 24V
Do not use 12V BEC to power video transmitters or pendants at 6S
3 function: LED controller
Only 4 pairs of LED wires, all LEDs have the same status
LED voltage is 5V
Three modes of backlight operation: constant, slow flicker (1Hz), fast flicker (3Hz)
4 function: Search
You can bind the toggle switch on the radio equipment. Middle position 1400 ~ 1600, off
Position 1000 ~ 1300, buzzer on and LED flickering.
Position 1700 ~ 2000, LED on with constant operation or flickering.
5 function: Low voltage alarm
The board can monitor the voltage status of 3~6S LiPo and notify by light and sound indication when the value reaches certain values (3.4V, 3.5V, 3.6V)
Brand: MatekSKU 12210
Reviews and discussions
There are no messages yet. Leave your message first.
Registration