• Home
• Store
• Electronic FPV components
• Power distribution boards

-0%

×

Matek PDB-XPW distribution board with 140A current sensor and dual BEC for 5V and 12V

Price:319 uah with VATPrice in USD:7.53

Bonuses will be issued for this product upon purchase

Read more

Brand: MatekSKU 11375

Archival goods

This item is no longer supplied

Out of stock

Notify when available

Description

TheMatek PDB-XPW is a power distribution board with a 140 Amp current sensor, 5V and 12V backups, and a new XT60PW side connector for convenient LiPo battery connection on the side. The PDB distributes power from LiPo to 4 ESCs, and provides synchronized and regulated DC 5V outputs and linear regulated DC 12V to power cameras, RC receivers, flight controllers, video transmitters, LEDs, etc.

Features

• Current Sensor up to 140 Amps.
• Quality 2oz copper contact pads in 4 layers.
• Two quality beacons - 5 volt with linear regulator and 12 volt no LC filter required under FPV video system.
• LED power indicators
• Short circuit tolerance
• XT60PW requires soldering to the board.
• The XT60PW connector is fully compatible with the regular XT60.

Features

• Input Voltage: 3S-5S 9 - 21VDC
• Current carrying capacity per channel: 4x30A (Max.4x35A)
• Runs: 5V and 12V
• Current Sensor at 140A, 3.3V

• BEC 5V
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2A (max. 2.5A 10s/min)
• Ripple: 40mV (VIn = 16V, VOut = 5V at 2A load)
• Short circuit tolerance: 5 seconds / minutes

• BEC 12V
• Voltage: 12.0 +/- 0.3 VDC
• Continuous current: 500mA (max. 0.8A 5s/min)
• Short circuit tolerance: 2 seconds/minute

• Mounting holes M3 (30.5mm)
• Output voltage: 12V / 5V, error 2.5%
• Output current: 500mA
• Dimensions: 36 x 50 x 4mm (without XT60PW), 36 x 58 x 10.5mm (with XT60PW)
• Weight: 8.5g (without XT60PW), 13g (with XT60PW)

Accessories

• 1 x Matek PDB-XPW power strip board
• 1 x set of M3 nylon posts
• 1 x XT60PW Male connector

Files

• Руководство по использованию Matek PDB-XPW на английском языке

Photos