• Home
• Store
• Radio equipment
• Receivers RX

-0%

×

FlyMod ExpressLRS 915MHz RX receiver

Price:832 uah with VATPrice in USD:19.90

Bonuses will be issued for this product upon purchase

Read more

Brand: FlyModSKU 16185

Out of stock

Notify when available

Description

FlyMod ExpressLRS 915MHz receiver, for use with 915MHz ELRS transmitting modules such as Happymodel, BetaFPV, etc.

Features

• Designed and built in FlyMod
• ELRS firmware version 1.1.0 pre-installed
• Ability to flash via WiFi hotspot of the receiver itself
• Thin Teflon wires for mounting in the kit
• Protection against power supply polarity reversal

Features

• Frequency: 915MHz
• RX protocol: CSRF
• Power supply: 5V (4-9V is acceptable)
• Operating current: ~ 100mA
• Control Processor: ESP8285
• LoRa Module: RFM95W/915
• Sensitivity: -148dBm
• Firmware update: Betaflight pass-through, UART (boot mode), WiFi
• Firmware Target: DIY 900 RX ESP8285 SX127x
• Connector: U.FL/IPEX1
• Dimensions: 19 x 16.5 x 4.5
• Weight: 1.6g (without antenna)

Accessories

• 1 x FlyMod ExpressLRS 915MHz receiver
• 1 x T-antenna
• 1 x heat shrink
• 1 x PTFE cable set

Note

• The receiver is flashed with an empty bind-phrase, so use the traditional method for pairing or flash it with your phrase set.
• It is easiest to flash and update the receiver directly through Betaflight.
• By default, the receiver will go into Wi-Fi hotspot mode after 2 minutes if there is no connection to the transmitter. In this mode it is possible to flash the receiver through the web interface.
• Additional information on ExpressLRS setup is available in our blog.

Useful links

• Інформація про ExpressLRS, документація, огляд

Photos