Matek introduces the F722-SE flight controller, equipped with an F7 HF processor and two gyroscopes MPU6000 and ICM20602, which are connected via a high-speed SPI bus. Also on board is a BMP280 barometer, on-board OSD, 5 UART ports, 8 PWM / Dshot / Proshot / Oneshot outputs, I2C port, 4 x RX6 contact pads for ESC telemetry, contact pads in the corners for individual ESCs and separate contact pads for 4-in-1 ESCs, voltage and current sensors.
The main innovative feature of this flight controller is the switchable video inputs for the two cameras, controlled via the AUX channel. The Matek F722-SE also has a filtered Vbat output signal for the VTX, which can also be switched on and off via the AUX channel.
Both gyros cannot be used simultaneously - the user must select one gyro for use in the Betaflight CLI.
FC specifications
Processor: 216MHz STM32F722RET6
Gyroscope: MPU6000 & ICM20602 (SPI)
Barometer: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
Firmware support: BetaFlight / INAV
Target (target): MATEKF722SE
Mounting holes: 30.5 x 30.5 mm, Φ4 mm with Φ3 mm spacers
inky, Все подойдут, но по схеме нужно будет подключить. Есть просто специальные контроллеры с уже готовыми разьемами, с приастиками ДЖИ https://flymod.net/item/hglrs_zeus_f722_dji
Reviews and discussions
Пока есть в наличии F7 контроллер от Diatone
https://flymod.net/item/diatone_mamba_f722s
https://flymod.net/item/hglrs_zeus_f722_dji
Registration