• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

Matek F722-HD DJI Flight Controller

Price:1 881 uah with VATPrice in USD:44.99

Bonuses will be issued for this product upon purchase

Read more

Brand: MatekSKU 15024

Out of stock

Notify when available

Description

The Matek F722-HD flight controller is designed for direct connection to a DJI FPV Air digital system. Since this FC is designed for digital FPV systems, it does not have an analog OSD module. With 6 UARTS, 10 PWM outputs, MPU6000 and BMP280 barometer, this is a great flight controller for quickly and easily assembling your drone to a DJI system. Compatible with BetaFlight and Inav firmware.

Features

• Processor: 216MHz STM32F722RET6
• Gyroscope: MPU6000 (SPI)
• Barometer: BMP280 (I2C)
• Blackbox: 32MB flash memory (SPI)
• OSD: support external DJI / FrSkyOSD digital OSD, analog OSD not built into MAX7456
• UARTS outputs: 6 with built-in inversion
• Softserial_Tx option: 1
• Dshot / PWM outputs: 10
• I2C: 1
• ADCS: 4 (VBAT, Current, RSSI, AirSpeed)
• SH1.0 8pin connector: 2 (Vbat / G / Curr / Rx3 / S1~S10)
• SH1.0 6pin connector: 1 (for DJI FPV Air Unit)
• LEDs: 3
  • Operating status: blue, red
  • 3.3V indicator: red
• Switchable 8V output
• PWM camera control: yes
• TR / SA VTX control: yes
• WS2812 LED strip: supported
• Beeper: supported
• RSSI: supported
• Analog airspeed sensor: supported
• Digital air speed sensor: supported
• Input Voltage:: 9~36V (3~8S LiPo)
• BEC: 5V 2A, (max. 3A)
• BEC: 8V 2A, (max. 3A)
• LDO 3.3V: max. 200mA
• Battery voltage sensor: 1:10 (scale 110), no built-in current sensor
• Firmware: BetaFlight
• Target: MATEKF722HD (MTKS)
• INAV Target: MATEKF722PX
• Mounting scheme: 30.5 x 30.5mm, Φ4mm, with spacers Φ3mm
• Dimensions: 36 x 36 x 5 mm
• Weight: 6.5g

Accessories

• 1 x Matek F722-HD flight controller
• 6 x silicone spacers from M4 to M3
• 1 x SH1.0 8pin 5cm cable
• 2 x SH1.0 8pin connectors
• 1 x SH1.0 6pin to GH1.25 8pin 8cm cable

Recommendations

• In BetaFlight firmware, when using the FrSkyOSD module, enable FrskyOSD on Uart6 in the BF 10.7 or later configurator
• In BetaFlight CLI mode, enter "resource SERIAL_TX 11 A02" if you want to use the TX2 panel as softserial1_TX.
• In the INAV firmware on Uart6, FrSskyOSD is enabled by default, replace it with the DJI FPV VTX protocol

Files

• Руководство пользователя Matek F722-HD

Photos