Beast H7 V2 55A AIO is a new innovative flight controller from iFlight that combines on one board one of the most advanced H743 processors, a powerful 4-in-1 55A speed controller and a new gyroscope BMI270, which works only with BetaFlight firmware version 4.3.0 and higher.
The perfect solution for space saving and easy assembly of a powerful mini quadcopter. Easy connection of DJI system (Vista Plug-and-Play), as well as a large number of UART outputs.
The board has a mounting layout of 25 x 25mm and overall dimensions of 32 x 32mm. Compactness and power is achieved by using a BGA type processor chip instead of the standard QFP, as well as heavy duty MOSFET transistors.
The main list of changes from V1 to V2
More optimized circuit design
New BMI270 gyroscope
Barometer removed
RPM filtering can be used with JazzMaverick (BLHeli-M) and JESC firmware.
Specifications
Processor: BGA-STM32H743
Gyroscope: BMI270
Barometer: none
Blackbox: 16Mb
BEC output: 5V 2.5A
Interface: Micro USB
OSD: AT7456E
Number of UARTs: 5 (UART1, UART2, UART3, UART4, UART7)
FC Firmware: BetaFlight
Firmware target： IFLIGHT_H743_AIO_V2
ESC rated current: 55A
ESC peak current: 60A
Input voltage: 2-6S LiPo
Current sensor: Yes (scale: 100)
ESC firmware: BLHeli_S (G-H-30 BLS 16.7)
Mounting Diagram: 25.5 x 25.5mm / Φ3mm
Dimensions: 32.5 x 32.5mm
Weight: 8.8g
Note:
The DJI Plug & Play port does not have a voltage regulator (BEC) and takes voltage from your battery via VBAT. The maximum input voltage for the Caddx Vista is 26.4V (6S LiPo) and the DJI Air Unit has a maximum input voltage of 17.6V (4S Lipo). Make sure you don't connect the DJI Air Unit directly when using the 6S battery, otherwise it will disable your DJI system.
A quadcopter assembly on a 4S battery requires an additional capacitor of at least 16V / 220uF, while a 6S assembly requires up to 35V or even 50V. Larger collectorless motors have higher current draw, higher voltage spikes and stronger back-EMF (reverse electromotive force). Solder the necessary low ESR capacitor to the battery connection pads. All necessary capacitors are supplied with the flight controller.
The new DPS310 barometer is more accurate than the previous BMP280, but cannot be activated in Betaflight below version 4.3.0.
Brand: iFlightSKU 15466
Reviews and discussions
Registration