• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

FlashHobby F405 flight stack with ESC 50A/60A 3-6s 4in1 30x30mm

Price:2 944 uah with VATPrice in USD:69.50

Bonuses will be issued for this product upon purchase

Read more

Brand: FlashHobbySKU 17208

• FC+ESC 50A
• FC+ESC 60A

Select the option!Archival goods

This item is no longer supplied

Out of stock

Notify when available

Description

The FlashHobby F405 ICM42688P 50A BL 30×30mm flight stack is designed for FPV enthusiasts seeking top-notch performance without the high cost.

The F405 flight controller is equipped with a powerful STM32F405 processor with ICM42688P to ensure that your drone will respond efficiently during every flight. Supporting popular Betaflight firmware options, you can customize the settings to your preferences. The innovative design of this stack allows you to easily combine it with other important components: electronic speed controller (ESC), video transmitter and receiver. The flight controller has a built-in PDB that optimizes the process of distributing power to all connected elements, including speed controllers.

The manufacturer has done everything possible to equip this stack with advanced components that are ideal for both experienced builders and beginners in the world of quadcopters.

Features.

FLASH HOBBY F405 30.5x30.5 FC flight controller

• MCU: STM32F405
• IMU (Gyro): ICM42688P
• USB port type: Type-C
• Barometer: BMP280
• OSD: BetaFlight OSD w/ AT7456E chip
• DJI Air Unit connection method: via 6-pin connector or soldering
• 6-pin DJI Connector: Supported. Fully compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire replacement required.
• Black box: 16M
• Input current sensor: Yes. For 50A ESC, set scale=180 and offset=0.
• Power consumption: 3S - 6S Lipo (via ESC 8-PIN connector)
• BEC:
  • 5V: 5 groups, total current load 3A
  • 9В: 3 groups, total current load 2.5A
  • 3.3V: 1 group，max. current 300mA
• ESC Outputs: M1 TO M4
• UART:
  • 6 ports (UART2 UART5, UART3),
  • UART6 (dedicated for SBUS),
  • UART4 (dedicated for ESC telemetry),
  • UART1 (dedicated for VTX data configuration)
• Sbs Debugging: via UART6 channel
• ESC Telemetry: UART R4(UART4)
• I2C: Supported. SDA and SCL Pad on the front side. Used for magnetometer.
• LED Pad: Supported. LED, 5V and GND pads on the bottom of the front panel. Used for the WS2812 LED controlled by the Betaflight firmware.
• Buzzer: Available，5V, BZ pads
• BOOT button: Yes
• Firmware support: BetaFlight(Default)
• Firmware Target: GEPRCF405
• Mounting scheme: 30.5x30.5mm (4mm hole diameter)
• Dimensions: 37x 37x6.6mm
• Weight: 7.5г

*Note (BOOT button. Usage options):
[А]. In case of firmware crash: Press and hold the BOOT button and turn on the FC at the same time to force the FC to enter DFU mode.
[Б]. When the FC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to the LED1-LED4 connectors on the bottom side. By default, press the BOOT button briefly to switch to the LED display mode. Press and hold the BOOT button to switch between the backlight modes. In the BF-LED mode, all LED1-LED4 strips will be controlled by the Betaflight firmware.

FLASH HOBBY BLS 50A 30.5x30.5 4-in-1 ESC speed controller

• Firmware: BLS 16.7
• Constant current: 50A*4
• Peak current: 60A (5 seconds)
• TVS protection: Yes
• External capacitor: 35V560uF Low ESR Capacitor (in package)
• ESC Protocol: DSHOT300/600
• Power consumption: 3-6S LiPo
• Output power: VBAT
• Current sensor support (scale = 180, offset = 0)
• ESC Telemetry: Not supported
• Mounting scheme: 30.5 x 30.5 mm (4 mm hole diameter)
• Dimensions: 42.3 x 37 x 6.2 mm
• Weight: 12г

Link to download the configurator: here

Package contents

• 1x Flight controller FLASH HOBBY F405 30.5x30.5 FC
• 1x FLASH HOBBY BLS 50A 30.5×30.5 4-in-1 ESC speed controller
• 1x Set of mounting components

Photos