TheF405-WING from Matek is an All in One flight controller specifically designed for flying wings. Matek F405-Wing has many advantages such as 6 x UART ports, MicroSD slot for Blackbox logging, BMP280 barometer, built-in OSD. There are several high performance BECs on the board, 5V / 5A for servo mechanisms, 12V / 2A for FPV and 5V / 2A for accessories such as GPS module, receiver, etc. The controller also has 2 specialized outputs for motors and 7 outputs for servos, allowing it to be used on almost any flying wings.
The Matek F405-WING has a dedicated MATEKF405SE target in the iNAV firmware, making it easy to update directly from the iNAV GUI.
Features
MCU: STM32F405 168 MHz
Accelerometer / Gyroscope: MPU6000 (SPI)
Barometer: BMP280 (I2C)
OSD: INAV OSD with AT7456E chip
Blackbox: MicroSD card slot (SD / SDHC)
VCP and 6 x UART ports
Motor outputs: 2
Servo outputs: 7
I2C ports: 2
3 x LEDs for FC STATUS (blue, red) and 3.3V BEC indicator (red)
Built-in inverter for SBUS input (UART2-RX)
PPM / UART Shared: UART2-RX
SoftSerial on TX2 board
Battery Voltage Sensor: 1:10 (scale 1100)
WS2812 Led Strip: Check
Buzzer: Check
RSSI: Check
Firmware: iNAV MATEKF405SE
Mounting: 30.5 x 30.5mm, hole diameter 4mm, with 3mm spacers
Dimensions: 56 x 36 x 13mm
Weight: 25g
PDB
Input Voltage Range: 9 ~ 30V (3 ~ 6S LiPo) with TVS protection
Outputs for ESC: 2
Current Sensor: 104A, 3.3V ADC, Scale 317
BEC 5V output
Designed for flight controller, receiver, OSD, FPV camera, buzzer, LED module, GPS module, AirSpeed
Continuous current: 2A (max. 3A)
BEC output 9V / 12V
Designed for video transmitter, FPV camera, LED module
Continuous current: 2A (max. 3A)
12V option with jumper
BEC Vx output
Designed for servos
Adjustable voltage: 5V default, 6V or 7.2V with jumper.
Brand: MatekSKU 12926
Reviews and discussions
Registration