The ES24TX Slim Pro 2.4G transmitter module is developed by Happymodel and is based on the gaining popularity of the open source ExpressLRS project. The module has low latency and high data rate. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chips. This Slim Pro module is manufactured in an aluminum package and has a cooling fan that automatically turns on when the module is running at 250mW. The Slim Pro TX supports a maximum output power of up to 1000mW, allowing your airplane or FPV quadcopter to fly long distances.
The ES24TX Slim Pro module is a Plug and Play ready solution for FrSky X-Lite, FrSky X-Lite Pro, FrSky X9 Lite, TBS Tango2 radio equipment.
Features
Supports power up to 1000mW (Jumper T-Lite and TBS Tango2 radios require external power supply)
RGB LED backlighting
Fan for automatic cooling when power exceeds 250mW
ExpressLRS V1.0.0 open source firmware
Large range, low latency and high refresh rate
Supports telemetry data transmission
Aluminum housing with CNC
Firmware update via ExpressLRS configurator or via Wi-Fi access point "ExpressLRS TX Module", open "10.0.0.1" in browser (password: expresslrs)
Characteristics
Regulatory domain: ISM2400
Processor: ESP32 (main), ESP8285 (auxiliary)
RF chip: SX1280IMLTRT
Interface: 8-pin (FrSky Lite)
Frequency range: 2400 to 2500MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF output power: ≤30dBm
Antenna gain: 1.87dBi
Firmware: ExpressLRS V2.0
Target: HappyModel_ES24TX_Pro_Series_2400_TX
Power supply operating voltage: 5 ~ 12V
Maximum current: <0.8A (VCC = 6V)
Size: 67.5 x 30 x 20.5mm (without antenna)
Weight: 50g (without antenna)
Accessories
1 x Happymodel ES24TX Slim Pro TX module
1 x Happymodel Moxon 2.4G antenna
Recommendations
Since ELTS development team members have not yet received samples of the Happymodel ES24TX Slim Pro, you can temporarily use this software target - ES24 Tx Slim Pro_v1.0.0
Incorrect display of power level in ELRS.LUA - 250mW (value in LUA) equals 1000mW output power
We recommend updating the firmware after the ExpressLRS developers release the official target firmware for this module
Reviews and discussions
Registration