Cart (063) 02 16 220
support@flymod.net
Support in Telegram telegram bot

BetaFPV ELRS Nano TX V2 2.4G/915MHz transmitter module

Price:1 797 uahPrice in USD:42.99
Select the option!

Description

The BetaFPV Nano RF TX module is based on the open source ExpressLRS project. The ExpressLRS project aims to achieve the highest possible channel performance in terms of both speed, latency and range. This makes ExpressLRS one of the most affordable RC projects for long range flights.

In V1 version of the module on ELRS2.0 and higher firmware does not work BLE Joystick mode and possible problem with WiFi Update Mode, i.e. the remote control cannot be used via Bluetooth as a joystick for simulators. It is possible to modify the module by adding a 3.3 volt linear regulator to the ESP power supply, which completely fixes these problems.

Characteristics

Package

Compatibility

The BetaFPV Nano RF TX module is compatible with radio equipment that has a Lite/Nano compartment for the nano module, such as the Frsky Taranis X-Lite, Frsky Taranis X9D Lite, TBS Tango 2, etc.

Note: be sure to connect the antenna before turning on the module! Otherwise, the module chip will be irreversibly damaged.

Модуль передатчика betafpv elrs nano tx 915mhz module передач

Firmware update

The standard firmware for ELRS nano receiver and transmitter modules manufactured by BetaFPV is ELRS V1.0.0-RC5.
The ELRS Innovative team officially released the first major version V1.0.0 on July 17, 2021 with the following updates:

BetaFPV strongly recommends updating the transmit module and receivers to the first major version V1.0.0. Alternatively, pilots can check this Github page for the latest released version.

Note:

What is ExpressLRS?

ExpressLRS is an open source RC project for RC components. Anyone can find this project on Github or join the discussion in the Facebook group.

ExpressLRS is based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. It aims to achieve the best possible channel performance in terms of both speed, latency and range. At 900MHz, a maximum packet rate of 200Hz is supported, and at 2.4GHz an incredible 500Hz.

More and more manufacturers are starting to support the ExpressLRS radio protocol in various products such as radio transmitters with ELRS, drones with built-in ELRS receiver, ELRS TX modules for the JR bay or Nano bay. BetaFPV is directly involved in this project, gradually incorporating the new technology into its products.

Files

Useful links

Photos

Модуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавачМодуль передатчика betafpv elrs nano tx 915mhz module передавач

Tags: elrs

Reviews and discussions

  • amatii14 Янв 2022, 14:08
    На Jumper T-Lite можно установить?
  • it_was14 Янв 2022, 14:33
    amatii, Да, подходит
  • alexua8 Фев 2022, 19:23
    В V2 версии модуля который у Вас на 2.4, на прошивке ELRS2.0 и выше работает BLE Joystick modeи WiFi Update Mode ? А можно ссылку или какую информацию по поводу регулятора подпаять, для запуска BLE Joystick modeи WiFi Update Mode на первой партии... про кондер видел а про 3.3 стаб. не нахожу.
  • it_was8 Фев 2022, 19:29
    alexua, В V2 версии BetaFPV исправили данную проблему. Один из наших клиентов решил проблему с V1 модулем с помощью пайки линейного регулятора на 3.3 вольта таким образом:

You need to be registered or authorized users to leave messages.
Registration