• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

Diatone Mamba Stack F722S V2 kit with F722S controller and F50Pro ESC

Price:3 384 uah with VATPrice in USD:79.99

Bonuses will be issued for this product upon purchase

Read more

Brand: DiatoneSKU 14389

Archival goods

This item is no longer supplied

Out of stock

Notify when available

Description

The Diatone Mamba Stack F722S flight stack consists of the Mamba F722S flight controller and the 4-in-1 Mamba F50Pro 50A 3-6S LiPo speed controller. The latest F7 processor combined with unrivaled ESC power will give a significant advantage in races against other pilots.

The V2 version of the flight stack includes an improved 4-in-1 ESC with a new design and layout of electronic components, and a peak current of 60A instead of 55A.

The kit comes with an additional textolite plate with a visual representation of the pinout.

The overall size of the stack is 36.5 x 48.5 x 6.5mm.

Mamba F722S FC specifications

• Processor: STM32F722RET6 32Bit 216MHz
• Gyroscope: MPU6000
• Input Voltage: 3-6S Lipo (12.6-25V)
• OSD: AT7456E
• Blackbox: 16Mb flash memory
• Built-in LED controller 2812: Yes
• Bluetooth: SpeedyBee app
• Smartaudio: yes
• RSSI: yes
• Squeaker: can be connected
• UART ports: 6
• ESC telemetry: RX6
• LED indication: blue and orange for FC status, green BEC 9V, white 5V, red 3.3V
• Short circuit protection: yes
• BEC: 5V/2A, 9V/2A (max. 3A), 3.3V
• Firmware: BetaFlight
• Target: Mamba F722S Legacy
• Mounting Diagram: 30.5 x 30.5mm, M3
• Weight: 6g

Note:

• STM32F722 generates a lot of heat, leave at least 5mm on both sides of FC to ensure good air circulation.
• Attention, please check the pinout of the LED modules to be connected, it may be different from the one used on this controller.

Mamba F50Pro ESC Specifications

• Input Voltage: 3 ~ 6 S LiPo (12.6 ~ 25V)
• Continuous current: 50A
• Peak current: 60A (10 sec)
• Current sensor: yes
• BEC: no
• Firmware: BLHeli_32
• Protocol: Dshot 300/600/1200
• Mounting Diagram: 30.5 x 30.5mm, M3
• Weight: 12g

Accessories

• 1 x Diatone Mamba F722S flight controller
• 1 x 4 in 1 Mamba F50Pro 50A speed controller
• 1 x 470uF 35V capacitor
• 1 x silicone ring kit
• 1 x XT60 male connector
• 1 x spare 8pin cable

Useful links

• Betaflight Configurator - Ссылка на скачивание конфигуратора для настройки полетных контроллеров

Photos