• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

Flight Stack Diatone Mamba F722APP MK1 WiFi 50A 6S

Price:4 019 uah with VATPrice in USD:94.99

Bonuses will be issued for this product upon purchase

Read more

Brand: DiatoneSKU 15541

Out of stock

Notify when available

Description

The Diatone Mamba F722APP MK1 flight stack consists of the Diatone Mamba F722APP flight controller and a 4-in-1 Diatone Mamba F50Pro 50A 6S LiPo speed controller.

With WiFi connection and the SpeedyBee App mobile app, you can control any settings of the flight controller without the need to connect to a PC.

Note:

• The STM32F722 generates a lot of heat, so leave at least 5mm on both sides of the FC to allow good air circulation
• Caution, please check the pinout of the LED modules to be connected, it may be different from the one used on this controller

Specifications

General

• Mounting Diagram: 30.5mm x 30.5mm, M3
• Weight: 22g

Diatone Mamba F722APP Flight Controller

• Processor: STM32F722RET6 32Bit 216MHz
• Gyroscope: MPU6000
• Barometer: none
• OSD: AT7456E
• Blackbox: 16Mb
• UART: 6 ports
• ESC Telemetry: RX6
• LED indication:
  • blue and orange for FC status
  • green BEC 9V
  • white BEC 5V
  • red BEC 3.3V
• Built-in LED controller 2812: Yes
• WiFi: SpeedyBee app
• Smart Audio: yes
• RSSI: yes
• Squeaker: supported
• Input Voltage: 3-6S Lipo (12.6-25V)
• Short circuit protection: yes
• BEC:
  • 5V/2A
  • 9V/2A (max. 3A)
  • 3.3V
• Firmware: BetaFlight
• Target: MAMBA F722 I2C
• Dimensions: 41 x 39 x 7.5mm
• Weight: 9g

ESC 4-in-1 Diatone Mamba F50Pro

• Input Voltage: 3 ~ 6 S LiPo (12.6 ~ 25V)
• Continuous current: 50A
• Peak current: 60A (10 sec)
• Current sensor: yes
• BEC: no
• Firmware: BLHeli_32
• Protocol: Dshot 300/600/1200
• Weight: 12g

Photos