TS-5W video transmitter with a high power of 5000 mW. It operates in the frequency range from 4990 MHz to 5945 MHz within 56 channels.
Features.
High power of 5W
Supports modern X-mesh and 4.9G frequency
Specifications.
Transmission power: 5W (5000mW)
Operating frequency range: 4990 -5945 MHz
Output power: 33-39 dBm
Operating voltage: 9-36 V
Current consumption: 1300mA
Output impedance: 50 Ohm
Input voltage: 12V
Video format: NTSC/ PAL
Connector: SMA
Size: 72.5 x 50 x 18.5mm
Weight: 77g
Connection and setup instructions:
Power on: Make sure you have previously installed the antenna in a suitable location, press the power button and the transmitter will start working. The display will show the last stored frequency band and channel. Be careful not to cover the heat sink cooling fan opening during operation.
Settings: Adjust the _CH channel and _FR frequency band of the module using the two buttons and the power button (note: it must be turned on after installing the antenna, otherwise the power gain will be burned)
Adjusting the frequency bands Press the FR button to tune the current frequency band, press the FR button briefly (about 0.5 s) to move from frequency band 1 to 2, and the indicator will show a value from 1 to 2; Press the FR button again (approximately 0.5 s), the frequency band changes from 2 to 3, and the value 2 to 3 is displayed... The frequency bands are cyclic A.B.E.F.R.L.X and the digital display shows them as 1.2 3.4.5.6.7.
Adjusting the channel Press the CH button to adjust the channel you are on, press the CH button briefly (approximately 0.5 s) when the frequency band changes from 1 to 2 and the value from 1 to 2 is displayed on the indicator; further adjustments are the same as when selecting the frequency band.
Reviews and discussions
Registration