The Matek VTX-1G3-9 9-channel 630mW video transmitter is specially designed for long range communication with the Matek VRX-1G3 video receiver. Everything you need to get a 1.3G long range FPV system!
Features
Frequency: 1080 - 1360MHz
Output Power: 28dBm (630mW)
Input Voltage: DC 6-36V (2-8S LiPo)
Push-button control and LED indicators
Built-in AGC microphone
Power Consumption: <2.5W
Video format: NTSC/PAL
Audio: 6.5MHz and 6.0MHz
Connector: SMA
Size: 36 x 21.5mm
Weight: 9g (without antenna)
Contacts
+ IN-: 6-36V DC with polarity protection
VID: video input
G: ground
5V: Built-in regulator output, max load 1.5A
Aud: Audio input 6.5MHz
TX & RX: UART for firmware upgrade
Accessories
1 x Matek VTX-1G3-9 1.2/1.3G video transmitter (9CH_INTL)
1 x SMA dipole antenna, center frequency 1240MHz
Settings
Press and hold the button for 2 seconds to enter the frequency setting. The LED will start blinking
Press the button to select the frequency
While the LED is flashing, no signal will be output until the settings are saved
The new frequency will be saved if the button is not pressed for 3 seconds
Brand: MatekSKU 14479
Reviews and discussions
Registration