• Home
• Store
• FPV systems
• Receivers

-0%

×

Matek VRX-1G3 V2 1.2/1.3GHz Video Receiver

Price:2 123 uah with VATPrice in USD:49.99

Bonuses will be issued for this product upon purchase

Read more

Brand: MatekSKU 14480

Archival goods

This item is no longer supplied

Out of stock

Notify when available

Description

Matek launches the VRX-1G3 V2 9-channel "FatShark" type receiver module to the RC market, paired with the new Matek VTX-1G3-9 video transmitter and matching antenna kit. Everything you need to get a 1.3G long-range FPV system!

Features

• Receiving frequency: 1080 - 1360MHz
• Number of channels: 9
• RX Sensitivity: -95dBm
• Bandpass Filter: 950 ~ 1450MHz
• Dual input options: 4 ~ 5V via pins or 6-30V via the "DC" pad on the VRX-DK
• Push-button control and LED indicators
• VRX-DK input voltage: 6 ~ 30V (contact "DC")
• VRX-DK built-in regulator output: 5V 2A
• Current Consumption: 0.3A at 5V
• Video format: NTSC/PAL
• Output impedance: 75 ohms
• Audio frequency: 6.5MHz and 6.0MHz
• Input impedance: 50 ohms
• Connector: SMA jack
• Size: 43 x 27mm
• 2.54mm pins and board size compatible with FS module
• Size: 43 x 27mm
• Weight: 12g (without docking station), 19g (with docking station)

Accessories

• 1 x Matek VRX-1G3 V2 1.2/1.3G video receiver
• 1 x VRX-DK
• 1 x SMA dipole antenna, center frequency 1240MHz

Settings

• Press and hold the button for 2 seconds to enter the frequency setting. The LED will start flashing
• Press the button to select the frequency
• When the LED flashes at the newly selected frequency, it means the RF input is enabled at that frequency
• The new frequency will be stored if the button is not pressed for 3 seconds.

Recommendations

• If you received a VRX module with 10 pins, just cut off pin S2, S2 is useless for the FS docking station
• Only 5 pins (5V, Gnd, A6.5, A6.0, Video) are needed to work with the FS docking station.

Photos