- My cart
- Prices in: USD
Show prices in:
- Exchange $: 41.7uah
- UA RU EN
Forgot your password?
Authorization withGoogle
Authorization withGoogle
Show prices in:
Bonuses will be issued for this product upon purchase
Read moreUSB Type-C charge/discharge controller for Li-Ion and Li-Polymer batteries with rated charging current of 1.0A and current protection for building POWERBANK portable chargers, etc.
The device is assembled on a specialized TP4056 chip. It is a complete product with linear constant voltage / constant current charging for single cell Li-ion batteries.
Parallel connection of batteries to the charger is possible.
The chip has a charge indication and disconnects the battery itself when the voltage reaches 4.2V. Also on the board there is a current protection of the battery when powered from it through the output of the device. The protection is built on the DW01-P chip (One Cell Lithium-ion/Polymer Battery Protection IC).
The following protection modes are applied:
1. Overcharge protection. Exceeds the maximum allowable charge voltage of the battery.
2. Over-discharge protection. Discharging the battery below the minimum allowable voltage.
3. Overcurrent protection. Exceeds the maximum discharge current of the battery.
The battery charge/discharge circuit is automatically restored after the protections are activated.
Indicators: red - charge, green (blue) - battery charged.
The battery is connected to the outputs "B+", "B-". The load is connected to the outputs "OUT+", "OUT-". Input voltage other than USB interface can be supplied to outputs "+" and "-".
It is possible to connect a step-up converter to the device output.
Note: There is no protection against incorrect input and battery connection.
Reviews and discussions
There are no messages yet. Leave your message first.
Registration