× SpeedyBee F7V3 BL32 50A 30x30mm SpeedyBee F7V3 Flight Stack Price:5 357 uah with VAT Price in USD:128.45 Bonuses will be issued for this product upon purchase
Read more
Description SpeedyBee F7V3 flight stack includes the F7V3 flight controller and BL32 50A 128K 4in1 ESC . Equipped with a BMP280 barometer, on-screen menu, 500MB blackbox, built-in charge monitoring and many other features. This stack will be the perfect addition to your FPV build.
Features
Supports BetaFlight flight controller firmware (default), EMUFlight
SmartPort - utilizes any UART transmit pad for SmartPort function.
Supports BLE, used to customize the flight controller.
Full slot DJI Air Unit JST on board
WiFi support - used for transferring data such as firmware
Download button - used to quickly enter DFU mode
RSSI input
WS2812 LEDs
WiFi/Bluetooth capabilities
Features
SpeedyRee F7 V3 Flight Controller
Processor: STM32F722
Gyroscope: MPU6000
Barometer: BMP280 (I2C)
OSD: BetaFlight OSD with AT7456E chip
Built-in BlackBox flash memory: 500Mb
BetaFlight camera control panel: Yes
Power Consumption: 3S - 6S LiPo
UART port: full UART x 5 (UART1, UART2, UART3, UART5, UART6)
ESC telemetry: UART UART4 RX
ESC signal pads: M1-M4 on the back side and M5-M8 on the front side
I2C bus: is there, SDA and SCL pads on the front side, used for external magnetometer, sonar, etc.
Support WS2812 LED modules: yes
Support beeper: yes, 5V (BZ+ and BZ- pads)
RSSI input: Yes
Interface: USB-C
DJI Air Unit slot: yes
Firmware: BetaFlight
Firmware Target: SPEEDYBEEF7V3
IMU: BMI270
USB: Type-C
Mounting Diagram: 30.5 x 30.5mm, hole size M4
Dimensions: 41 x 38 x 8.1mm
Weight: 10.7g
SpeedyBee BL32 50A 4in1 ESC Speed Controller
Firmware: SpeedyBee BL32 50A
Wireless Configuration: Support SpeedyBee app
PC Configurator link: http://github.com/bitdump/BLHeli/releases
DC current: 50A x 4
Peak current: 55A(5sec)
TVS protection: Check
Radiator: Check
External Capacitor: 1500uF Low ESR Capacitor(Included)
ESC Protocol: DSHOT300/600
PWM Frequency: 16KHz-128KHz
Input Power: 3-6S LiPo
Output Power: VBAT
Current Sensor: Yes
Mounting size: 30.5x30.5mm (hole diameter 4mm)
Dimensions: 45.6x40x8.8mm
Weight: 19.2g (with heatsink)
Accessories
F7 V3 FC
1 x SpeedyRee F7 V3 Flight Controller
1 x DJI 6pin Cable(80mm)
1 x SH 1.0mm 30mm-length 8pin Cable(for FC-ESC connection)
5 x M3*8mm Silicone Grommets(for FC)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(30mm) (A)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(60mm) (B)
1 x 4pin SH1.0 to 4pin JST1.25 FPV Cam Cable(60mm) (C)
1 x 4pin SH1.0 Radio Receiver Cable(100mm) (D)
1 x 4pin SH1.0 to 4pin SH1.0 Analog VTX Cable (E)
1 x 6pin SH1.0 GPS Module Cable without Connector on other end(100mm) (F)
1 x 6pin SH1.0 GPS Module Cable Connector of another end (G)
BL32 50A 4in1 ESC
1x SpeedyRee Speed Controller BL32 50A 4in1 ESC
1x 35V 1000uF Low ESR Capacitor
5x M3x8.1mm silicone bushings (for ESC)
5x M3x8.1mm silicone o-rings
1x SH 1.0mm 30mm 8pin cable(for FC-ESC connection)
1x XT60 power cable(70mm)
Useful links 
Brand: SpeedyBeeSKU 16970
Reviews and discussions
There are no messages yet. Leave your message first.
Registration