• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

SpeedyBee F405 V3 Flight Stack with ESC 50A 3-6s BLHeli_S 4in1 30x30mm

Price:2 772 uah with VATPrice in USD:66.30

Bonuses will be issued for this product upon purchase

Read more

Brand: SpeedyBeeSKU 16930

Out of stock

Notify when available

Description

SpeedyBee F405 flight stack: F405 V3 FC flight controller and 50A 3-6s BLHeli_S 4-in-1 ESC in a 30x30mm size. This Bluetooth-connectable and customizable model has built-in 4-level battery indicators, 1500µF filter capacitor, built-in barometer and more.

Features

• Dedicated DJI Air Unit connector for quick connection
• 4 x UART for connecting devices: receiver, VTX, camera, GPS
• SD card slot supports up to 4GB of Blackbox data
• BEC: 9V 2A and 5V 2A
• 4-level LED battery charge indicator
• 8 motor outputs: m1-m8
• Built-in barometer
• Bluetooth control

Features

F405 V3 FC flight controller:

• MCU: STM32F405
• IMU(Gyro): BMI270
• USB Port: Type-C
• Barometer: Built-in
• OSD Chip: AT7456E chip
• BLE Bluetooth: Supported. Used to customize the flight controller
• DJI Air Unit connection method: using 6-pin connector or soldering
• Blackbox MicroSD memory card support: Yes
• BetaFlight camera control panel: yes
• Input current sensor: yes
• Input power: 3S - 6S Lipo
• ESC outputs: M1 - M4 on the bottom side and M5-M8 on the top side
• UART: 6 sets(UART1, UART2, UART3, UART4(for ESC telemetry), UART6)
• ESC: Telemetry UART R5(UART5)
• I2C: supported
• Buzzer: available
• BOOT button: yes
• RSSI input: yes
• SmartPort: yes
• Firmware support: BetaFlight(Default), EMUFlight, INAV
• Firmware Target: SPEEDYBEEF405V3
• Mounting Diagram: 30.5x30.5mm (hole diameter 4mm)
• Dimensions: 41.6x39.4x7.8mm
• Weight: 9.6g

*Note: BOOT button. Usage options:
[А]. Press and hold the BOOT button and turn on the FC at the same time to force the FC to enter DFU mode, this is for flashing the FC when the firmware has come off.
[Б]. When the PC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to the LED1-LED4 connectors on the underside. By default, briefly press the BOOT button to switch to LED display mode. Press and hold the BOOT button to toggle between SpeedyBee-LED mode and BF-LED mode. In BF-LED mode, all LED1-LED4 strips will be controlled by the Betaflight firmware.

SpeedyBee BLS 50A 30x30 4-in-1 ESC speed controller

• Firmware: BLHeli_S JH50
• Wireless Configuration: SpeedyBee App Support
• PC Configurator link: https://esc-configurator.com/
• DC current: 50A x 4
• Peak current: 55A(5sec)
• TVS protection: Yes
• External Capacitor: 1500uF Low ESR Capacitor(included)
• ESC Protocol: DSHOT300/600
• Input Power: 3-6S LiPo
• Output Power: VBAT
• Current Sensor: Yes
• Mounting Size: 30.5x30.5mm (hole diameter 4mm)
• Dimensions: 45.6x44x6.1mm
• Weight: 13.8g

Accessories

F405 V3 FC

• 1x SH 1.0mm 30mm 8pin cable (for FC-ESC connection)
• 1x SpeedyBee F405 V3 Flight Controller - 30x30
• 5x M3x8mm silicone grommets (for FC)
• 1x DJI 6pin cable(80mm)

50A 3-6s BLHeli_S 4-in-1 ESC

• 1x SH 1.0mm 30mm 8pin cable(for FC-ESC connection)
• 1x SpeedyBee 50A 3-6S BLHeli_S 4-in-1 ESC - 30x30
• 5x M3x8.1mm silicone bushings (for ESC)
• 1x 35V 1500uF Low ESR Capacitor
• 1x XT60 power cable(70mm)
• 5x M3 silicone o-rings

Useful links

• Официальная страница SpeedyBee F405 V3 FC F405 V3 с ESC 50A 3-6s BLHeli_S 4в1 30x30мм

Photos