Відео передавач RushFPV 4 9G 5 8G 2 5W VTX Dual-Band на 56 каналів

RushFPV 4.9G/5.8G 2.5W VTX Dual-Band video transmitter for 56 channels

Price:Price in USD:

Brand: RushFPVSKU

Description

TheRushFPV 4.9G/5.8G 2.5W VTX video transmitter supports two frequency bands, which provides a wide range of channels for video transmission. With adjustable power from 25mW to 2500mW, the device can adapt to different operating conditions. The aluminum housing with three levels of protection and a built-in fan effectively dissipate heat, allowing the transmitter to be used in high-loaded modes. It is controlled by theIRC Tramp protocol, which simplifies configuration and monitoring. PLL technology ensures frequency accuracy with a deviation of no more than ±200KHz.

Features.

Dual-band transmitter design with fast switching significantly extends channel coverage and provides more features
Efficient PA and power calibration to ensure power consistency across all channels
Triple aluminum alloy shell and large centrifugal fan provide sufficient heat dissipation

Setup instructions for RushFPV 4.9G/5.8G 2.5W VTX Dual-Band Video Transmitter

The antenna must be installed before use!

The frequency of the antenna must match the SMA interface definition!

Notes on use:

Operated with a single button, the button integrates RGB lighting: blue for band, red for channel, and green for power level.
When there is no operation, the RGB LED indicator flashes cyclically, the number of flashes of the RGB indicator reflects the current state of the VTX (when the green LED indicator is on steadily, the VTX enters PITMODE).
Hold down the button to enter the VTX setting, at this time, the RGB indicators light up alternately, release the button under the corresponding color indicator to enter the corresponding function setting. At this time, short press the button to adjust the value.
To adjust through the flight controller, connect the DATA pin and use the IRC Trump protocol.