• Home
• Store
• FPV systems
• Transmitters

-0%

×

Matek VTX-1G3SE-9 1.2/1.3GHz video transmitter for 9 channels

Price:1 910 uah with VATPrice in USD:44.99

Bonuses will be issued for this product upon purchase

Read more

Brand: MatekSKU 16752

Out of stock

Notify when available

Description

The MATEKSYS 1G3SE 9-channel video transmitter operates at 1.2GHz and 1.3GHz. This model VTX-1G3SE comes complete with a dipole antenna SMA and has 9 channels, SMA connector, push-button control, LED indicators, and more.

Features

• Frequency: 1080 - 1360MHz
• Antenna: SMA dipole antenna (center frequency 1240 MHz)
• Output Power: 0.1mw(0, pit mode), 25mw(1), 200mw(2), 800mw(3)
• Input voltage: DC 6-36V (2-8S LiPo)
• Push-button control and LED indicators
• Built-in AGC microphone
• Power Consumption: <2.5W
• Video format: NTSC/PAL
• Audio: 6.5MHz and 6.0MHz
• Connector: SMA
• Size: 36 x 21.5mm
• Weight: 9g (without antenna)

Contacts

• + IN-: 6-36V DC with polarity protection
• VID: video input
• G: ground
• 5V: Built-in regulator output, max load 1.5A
• Aud: Audio input 6.5MHz
• TX & RX: UART for firmware upgrade

Features

• CMS control via Tramp protocol option for 1.3G
• CMS control via IRC Tramp protocol
• Push-button control and LED indicators
• Built-in AGC microphone

Accessories

• 1 x Matek VTX-1G3SE-9 1.2/1.3G (9CH_INTL) video transmitter
• 1 x SMA dipole antenna, center frequency 1240MHz

Settings

• Press button-A to select RF power levels, 0 (blue LED) = 0.1 mW, 1=25 mW. 2=200 mW, 3=800 mW
• Press and hold button-B for 2 seconds to enter the frequency setting. The frequency indicator flashes
  Press button-B to select the frequency.
  When the LED flashes on a new frequency, there is no RF output on that frequency.
  The new frequency and output will be activated if no button is pressed for 3 seconds.

Photos