The Matek mini PDB is designed to maximize performance and reliability despite its small size of only 32x22x3mm. The hub distributes power from the battery pack to up to 4 ESCs, and provides synchronized and regulated DC outputs (BEC) to power cameras, servos, video transmitters, LEDs, etc. Suitable for 3S-5S LiPo batteries.
Features
Small and lightweight
Can power 12V camera, FPV transmitter and 12V LED without interference and noise
Supports 3-5S Lipo input
2oz copper pads and 4-layer PCB
Short circuit tolerance (5sec/min)
If the mounting holes don't match, you can attach the board with double-sided tape
BEC 5V: Designed for RC receivers, flight controllers, OSDs and servos.
BEC 12V: Designed to power cameras, video transmitters, etc. Д.
Specifications
Operating voltage: 7~21VDC (3~5S LiPo)
ESC continuous current: 20A per output
ESC peak current (10sec/min): 25A per output
BEC 5V output voltage: 5.0 +/- 0.1VDC
BEC 5V output DC current: 2A
BEC 12V output voltage: 12.0 +/- 0.2VDC
BEC 12V output DC current: 2A (max 2.5A, 5sec/min)
mixa, даже не сильно разбираясь в электронике можно уведеть два одинаковых бэка и площадки пдб и больше ничего. Хочешь фильтр на видесистему так и бери фильтр, их в магазине есть))
0
You need to be registered or authorized users to leave messages. Registration
Brand: MatekSKU 11456
Reviews and discussions
Registration