Matek F411-ONE type All in One flight controller based on STM32F411 MCU with standard features such as built-in PDB, BetaFlight OSD, 5V/2A BEC and current sensor. The main feature of this controller is the built-in SPI receiver on two IPEX 2.4G antennas using the FrSky_X protocol.
Note! If you have a problem with failsafe triggering, use D8 mod and Frsky_D protocol with Multishot or Dshot command disabled. Or try to install the BF3.4.0_MATEKF411RX_combo.hex fix (link below).
Specifications
MCU: 100MHz STM32F411CEU6
IMU Sensor: MPU6000 Gyroscope / Accelerometer
OSD: BetaFlight OSD with AT7456E chip
Receiver: 2500-2431 module, FrSky_X or FrSky_D protocol
VCP, UART1, UART2
LEDs LED WS2812
Squeaker
PPM: RX2
Black Box: No
SBUS input: No
I2C1 SDA and SCL: No
PDB Specifications:
Incoming power supply: 6 ~ 30V (3 ~ 6S LiPo) with TVS protection
Configuration: 4 ESC x 30A (max. 4 x 46A)
BEC: 5V 2A (max. 3A)
3.3V LDO controller: max. 300mA
Current sensor: 184A (scale 179)
Battery voltage sensor: 1:10 (scale 110)
Other features:
3 x LEDs to indicate STATUS (blue), RX (green) and 3.3V indicator (red)
Reviews and discussions
There are no messages yet. Leave your message first.
Registration