× Racing FPV quadcopter iFlight Nazgul5 V2 Analog 240mm PNP 4S/6S Price:12 690 uah with VAT Price in USD:299.99 Bonuses will be issued for this product upon purchase
Read more Select the option!
Description TheiFlight Nazgul5 Analog V2 is a powerful 5-inch quadcopter based on the XL5 V5 frame and BLITZ F7 V1.1 flight controller. Pre-tuned and calibrated from the factory. Great power and smooth flight are guaranteed by the popular Xing-E motors with long-lasting NSK bearings.
The V2 version replaces the Caddx Ratel analog camera with the iFlight RaceCam R1 with similar features.
Features
iFlight XL5 V5 carbon frame with 5mm thick beams and increased width toward the center of the mount for greater strength
Popular True-X frame form factor
Quick-change beam design
LED illumination of the iFlight logo
Assembly is based on the BLITZ F7 V1.1 flight controller
More power and smooth flight is guaranteed using the popular iFlight Xing-E motors with durable NSK bearings
Protective TPU plastic parts
Mounting platform for GoPro type action cameras
The drone is fully customized and tested from the manufacturer. Basic filters and PID's are set up, and a few more additional software tweaks to improve flight quality
Note:
Angle-Mode (self-balancing mode) is enabled by default so that the first flight doesn't end in a crash. How do I switch Angle Mode to Acro Mode?
PNP version means that there is no receiver for radio equipment in the kit The action camera and camera housing shown in the photo are not included in the kit (only the pad without the housing for the GoPro mount is included)
VTX is set to 25mW by default!
Did you accidentally reset the PID to factory settings? You can restore them with the help of FAQ on the official iFlight website
Features
iFlight XL5 V5 frame specifications
Frame size in motor axes: 240mm
Form factor: True-X
Beam thickness: 5mm
Top plate: 2mm
Bottom plate: 3mm
Side plates: 1.5mm
Mounting Diagram: 30.5 x 30.5, 20 x 20mm
Distance for FPV camera mounting: 19mm
Size: 170 x 170mm
Features of FPV camera iFlight RaceCam R1
Matrix: 1/1.8" CMOS Starlight HDR
Horizontal resolution: 1200TVL
Lens: 2.1mm FOV 165°
Image Format: 16:9 / 4:3 (variable)
TV System: NTSC & PAL (Variable)
WDR: Super WDR (HDR)
DNR: 3-DNR
Min. illumination: 0.0001 lux Starlight
Synchronization: Internal
Minimum delay: 8 ms
Shutter speed: PAL: 1/50 ~ 100,000; NTSC: 1/60 ~ 100,000
Signal to noise ratio: > 60dB (AGC OFF)
OSD: Yes
Day/Night modes: Auto / Color / B&W / EXT
Video output: CVBS
Power supply: 5-40V
Case Material: magnesium-aluminum alloy
Dimensions: 19 x 19 x 20mm
Weight: 5.9g
Specifications iFlight BLITZ F7 V1.1
Processor: STM32 F722
Gyroscope: BMI270
Barometer: DPS310 (barometer can only be used with Betaflight 4.3.0 and above)
Betaflight OSD: AT7456E
BlackBox: 32Mb
Input Voltage: 2-6S LiPo (max. 8S 50V)
Motor outputs: 4 (SH1.0 socket)
UART outputs: 6
I2C bus: SDA / SLA pads
WS2812 LED strip: supported
Squeaker：supported
BEC: 5V / 2.5A
Firmware： BetaFlight
Target：IFRC-IFLIGHT_BLITZ_F722
Mounting holes： 30.5 x 30.5mm, φ4mm, with φ3mm dampers
Dimensions: 36.5 x 35mm
Weight: 7.8g
Specifications ESC 4 in 1 iFlight SucceX-E 45A V2
Processor: EFM8BB21 24mHz
DC current: 45A
Peak current: 50A
Voltage support: 2-6S LiPo
Current Sensor: Yes
WEIGHT: no
Firmware: BLHeli_S 16.X
Protocols: DShot 150/300/600, MultiShot, OneShot
Mounting holes: 30.5 x 30.5mm, φ4mm, with dampers φ3mm
Dimensions: 36 x 43mm
Weight: 15g
Features of the iFlight Xing-E 2207 Pro
Revolutions per Volt:
6S version: 1800KV
Version 4S: 2750KV
Configuration: 12N14P
Stator diameter: 22mm
Stator length: 7mm
Magnets: N52SH
Bearing size: 9 x 4 x 4mm
Shaft diameter: 4mm
Shaft material: steel
Voltage:
6S version: 3-6S LiPo
4S version: 3-4S LiPo
Mounting scheme: M3 thread, 16 x16 mm
Motor size: 28.5 x 19.7 mm
Weight: 33.1g (15cm wire)
Specifications VTX SucceX Force 5.8g
Мощность: PIT/25mW/200mW/400mW/800mW
Number of channels: 48
Built-in output power self-test function
Video format: NTSC / PAL
Input voltage: 7V～36V，+12V/380mA at 800mW
Size: 36 x 36 x 3mm
Weight: 7.2g
Accessories
1 x iFlight Nazgul5 Analog V2 ready-made quadcopter
2 x iFlight Nazgul 5140 propeller kit
1 x set of wires
2 x anti-slip mats
2 x iFlight Velcro
1 x Albatross RHCP SMA 5.8G antenna
1 x protective tubes for receiver antennas
1 x Micro USB cable
1 x action camera mount
1 x instruction manual
Brand: iFlightSKU 15897
Reviews and discussions
Registration