iFlight Cidora SL5-E 215mm 4S/6S PNP FPV racing quadcopter

Ready-made FPV quadcopter Cidora SL5-E from iFlight in two variations, for 4S or 6S batteries. The assembly uses quality iFlight electronic components, perfectly matched and pre-configured!

The 4S and 6S versions differ in the motors installed. The 4S version uses iFlight Xing-E 2207 2450KV motors and the 6S version uses Xing-E 2207 1800KV motors.

PNP versions of the quadcopters are on sale, that is, without a receiver. The receiver you choose yourself under your radio control equipment.

• Sturdy 3K carbon fiber frame, easy to replace beams and weighs 115 grams
• Popular Squish-X configuration
• SucceX-E F4 flight stack with 4-in-1 45A speed controller

• Frame size along motor axes: 215mm
• Flight controller: SucceX-E F4
• Speed controller: SucceX-E 45A 2-6S Dshot1200
• Motors:
  • 4S: Xing-E 2207 2450KV
  • 6S: Xing-E 2207 1800KV
• FPV Camera: Caddx Ratel 2.1mm
• Propellers: iFlight Nazgul 5140
• Overall dimensions: 165 x 138mm
• Weight: 384g

• Processor ： STM32F405
• Gyroscope： MPU6000
• Betaflight OSD： AT7456E
• BlackBox: 8mb
• Input voltage： 2-6S LiPo (max 8S 50V)
• PWM Outputs: 4
• UART outputs: 4 （1, 2, 3, 6)
• ESC outputs: 8
• BEC: 5V / 2.5A
• Firmware: betaflight_4.0.5_BETAFLIGHTF4.hex
• Target： IFRC/IFF4_TWIN_G(STM32F405)
• Mounting holes: 30.5 x 30.5mm, φ4mm, with φ3mm dampers
• Dimensions: 36 x 36mm
• Weight: 7.6g

• DC current: 45A
• Peak current: 55A
• Support voltage: 2-6S LiPo
• Processor: STM32F051, 48Mhz
• Current Sensor: Yes
• WEIGHT: no
• Firmware: BLHeli_S
• Protocols: DShot 150/300/600, MultiShot, OneShot
• Target: G-H-30 BLS 16.7
• Dimensions: 40 x 43mm
• Mounting holes: 30.5 x 30.5mm/Φ3mm
• Weight: 14.4g

• Frequency: 5.8G
• Power: 25/200/400/800mW
• Number of channels: 48 including Raceband
• Telemetry: Tramp with OSD/Lua script frequency control
• Fast frequency lock, soft start to reduce interference to other pilots
• Built-in power output self-check function;
• TV system: NTSC / PAL
• Input voltage: 7 - 28V
• Consumption: 12V / 500mA at 800mW
• Size: 36 x 36 x 8mm
• Weight: 11g

• 1 x ready-made Cidora SL5-E 4S/6S - PNP drone
• 2 x iFlight Nazgul 5140 propeller kit