The iFlight BLITZ Mini F4 flight controller with a new and improved design and components with lower electrical noise. The controller has a built-in connector for DJI HD VTX (Plug-and-Play / no soldering required) and has LED indicators for visual debugging.
Features
Processor: STM32F405
Gyroscope: MPU6000
Barometer: None
OSD: AT7456E
Black Box: 16Mb
UART outputs: 6
I2C serial port: SDA/SLA pads
VTX Protocol Support: Smartaudio / IRC Tramp
LED controller: Yes
Buzzer pad: yes
Firmware: BetaFlight
Firmware target: IFRC-IFLIGHT_BLITZ_F405
Mounting scheme: 20 x 20mm / φ4mm
Dimensions: 30.5 x 27mm
Weight: 5g
Recommendations
Wiring recommendations:
UART 1 for VTX HD/analog
UART 2 for receiver
UART 3/4 for GPS or other sensors that require a serial port
UART 6 for ESC telemetry
Other tips:
The MCU F405 does not have a built-in converter (inverter)
SBUS, CRSF, ELRS, IBUS, DSM and other receivers can be connected to any unused UART_RX, it is recommended to connect the receiver to UART_RX2
Frsky SmartPort, Tramp and Smartaudio can be connected to any unused UART_TX, it is recommended to connect video transmitter to UART_TX1.
F.port can be used, it is necessary to connect to UART_TX2 and configure the internal inverter
Included connectors (Plug-and-Play wiring harness):
1 x SH1.0 9-pin connector for HD VTX/analog VTX and CAM (5V/BAT/G/V/VO/T1/R1/5V/G/VI)
1 x SH1.0 8-pin connector for ESC (R6/CUR/M4/M3/M2/M1/BAT/G)
1 x SH1.0 6-pin connector for any receiver or DJI (3V3/R2i/5V/G/R2/T2)
1 x SH1.0 4-pin GPS connector (T4/R4/G/5V)
1 x SH1.0 4-pin LED&Beeper connector (BUZ/LED/G/5V)
Brand: iFlightSKU 16743
Reviews and discussions
Registration