Beast F7 45A AIO is a new innovative flight controller from iFlight, combining on one board a high-speed F745 processor, 4-in-1 45A speed controller, on-board barometer for long-range flights and much more. The perfect solution for space saving and easy mini quadcopter assembly. Easy connection of DJI system (Vista Plug-and-Play), as well as a large number of UART outputs.
The board has a mounting layout of 25 x 25mm and overall dimensions of 32 x 32mm. Compactness and power is achieved by using BGA type processor chip instead of standard QFP, as well as heavy duty MOSFET transistors.
Features
Processor: BGA-STM32F745
Gyroscope: MPU6000
Barometer: BMP280
Blackbox: 8Mb
BEC Output: 5V 2.5A
Interface: Micro USB
OSD: AT7456E
FC firmware: BetaFlight
Firmware target： IFLIGHT_F745_AIO
ESC rated current: 45A
ESC peak current: 50A
Input voltage: 2-6S LiPo
Current sensor: Yes (scale: 200)
Number of UARTs: 5
ESC Firmware: BLHeli_S (BLHeli_S G-H-30)
Mounting Diagram: 25.5 x 25.5mm / Φ3mm
Dimensions: 32.5 x 32.5mm
Weight: 8.5g
Note:
The DJI Plug & Play port does not have a voltage regulator (BEC) and takes voltage from your battery via VBAT. The maximum input voltage for the Caddx Vista is 26.4V (6S LiPo) and the DJI Air Unit has a maximum input voltage of 17.6V (4S Lipo). Make sure you don't connect the DJI Air Unit directly when using the 6S battery, otherwise it will disable your DJI system.
A quadcopter assembly on a 4S battery requires an additional capacitor of at least 16V / 220uF, while a 6S assembly requires up to 35V or even 50V. Larger collectorless motors have higher current draw, higher voltage spikes and stronger back-EMF (reverse electromotive force). Solder the necessary low ESR capacitor to the battery connection pads. All necessary capacitors are supplied with the flight controller.
Bundle
1 x iFlight Beast F7 45A AIO flight controller
1 x 470uF 16V capacitor
1 x 470uF 35V capacitor
1 x 16AWG 100mm cable with XT60H
1 x 18AWG 70mm cable with XT30U
1 x 14AWG 100mm power cable
1 x 7P cable set
4 x M2 silicone pads
8 x M2 x 12mm bolts
8 x M2 nylon nuts
8 x black heat shrink tubing
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: iFlightSKU 15464
Reviews and discussions
There are no messages yet. Leave your message first.
Registration