SpeedyBee F405 V3 30x30mm flight controller

Name: SpeedyBee F405 V3 30x30mm flight controller
Brand: SpeedyBee
SKU: 16969
Price: 1873 UAH
Availability: OutOfStock
Rating: 4.6 (19 reviews)

Price:1 873 uahPrice in USD:44.90

Brand: SpeedyBeeSKU 16969

Out of stock

Notify when available

Description

SpeedyBee F405 V3 flight controller with 30x30mm mounting pattern supports Bluetooth connectivity and customization. It has a 4-level LED battery charge indicator. The F405 V3 FC also features a built-in barometer and other useful features.

Features

Dedicated DJI Air Unit connector for quick connection
4 x UART for connecting devices: receiver, VTX, camera, GPS
SD card slot supports up to 4GB of Blackbox data
BEC: 9V 2A and 5V 2A
4-level LED battery charge indicator
8 motor outputs: m1-m8
Built-in barometer
Bluetooth control

Features

Flight Controller F405 V3 FC
MCU: STM32F405
IMU(Gyro): BMI270
USB Port: Type-C
Barometer: Built-in
OSD Chip: AT7456E chip
BLE Bluetooth: Supported. Used to customize the flight controller
DJI Air Unit connection method: using 6-pin connector or soldering
Blackbox MicroSD memory card support: Yes
BetaFlight camera control panel: yes
Input current sensor: yes
Input power: 3S - 6S Lipo
ESC outputs: M1 - M4 on the bottom side and M5-M8 on the top side
UART: 6 sets(UART1, UART2, UART3, UART4(for ESC telemetry), UART6)
ESC: Telemetry UART R5(UART5)
I2C: supported
Buzzer: available
BOOT button: yes
RSSI input: yes
SmartPort: yes
Firmware support: BetaFlight(Default), EMUFlight, INAV
Firmware Target: SPEEDYBEEF405V3
Mounting Diagram: 30.5x30.5mm (hole diameter 4mm)
Dimensions: 41.6x39.4x7.8mm
Weight: 9.6g

*Note: BOOT button. Usage options:
[А]. Press and hold the BOOT button and turn on the FC at the same time to force the FC to enter DFU mode, this is for flashing the FC when the firmware has come off.
[Б]. When the PC is powered on and in standby mode, the BOOT button can be used to control the LED strips connected to the LED1-LED4 connectors on the underside. By default, briefly press the BOOT button to switch to LED display mode. Press and hold the BOOT button to toggle between SpeedyBee-LED mode and BF-LED mode. In BF-LED mode, all LED1-LED4 strips will be controlled by Betaflight firmware.