RS2205-S are brand new, improved motors that have proven their endurance and performance in a variety of flight conditions. Using premium materials, the motors are lighter, more responsive at high rpm, and the thrust on the 5 inch propellers has been increased to 1281 grams.
Please note that EMAX RS2205 S-Series motors are only manufactured with CW conventional (straight) threads as CCW reverse threads are considered optional.
Features
Legendary EMAX product quality. The company's engineers have achieved a minimum gap of 0.10mm between the magnets and stator, making each motor quality assembled and balanced from the factory.
The motor profile is now lower and the weight has been reduced to 28 grams, 2 grams lighter than the last version, which will appeal to racers who value every gram of their racing quadcopter.
Anti-skid propeller landing pad.
Redesigned motor bell with a reduced profile, without sacrificing the overall structural integrity and endurance of the motor. This eliminated unnecessary weight and increased the motor's bellcrank torsional speed dial. Now there is even better mass distribution across all axes of the quadcopter.
Cooling Series cooling has been updated as well, and the efficiency factor of the motor has been improved.
Powerful and high-quality neodymium (Neodymium) magnets N52SH, give better acceleration, stopping and motor life at high speeds.
Quality genuine Japanese NMB bearings, smooth torsion and long life.
Maximum thrust from 4s battery and 5 inch DAL 5045 Tri-blade propellers is 1281 grams. Increased thrust over the last version by +100 grams, and also when tested with KingKong 6x4 propellers the thrust is over 1400 grams.
New hollow shaft for maximum endurance. Now you don't have to worry about various crash surprises.
The bellhousing system is bolted from the bottom, adding to the reliability of the design and ease of service without special tools.
Features
Revolutions per Volt (KV): 2300
Cable type: 20AWG
Stator Diameter: 22mm
Stator height: 5mm
Shaft height: 13.1
Shaft Diameter: 5mm
Configuration: 12N14P
Motor diameter: 27.9mm
Motor height: 28.6mm
Shaft thread diameter: M5
Input Voltage: 3S-4S (12.6 - 16.8v)
Maximum thrust with DAL 5045 Tri-blade propellers - 1281g; HQ5045 BN 2 blade - 1236g .
Weight with wires: 28,8g.
Accessories
1x - EMAX RS2205 2300KV motor (CW thread)
1x - aluminum nut
2x - set of bolts for the motor, 4mm and 3mm frame thickness.
1x - hexagon
Attention! При встановленні на занадто довгі болти можуть пошкодити обмотку двигуна, що виведе його з ладу.
Reviews and discussions
Registration