AKK 1S LiPo/LiHV charger

AKK charger for 1S LiPo/LiHV batteries. There are 6 pairs of micro JST 1.25 and JST-PH 2.0 connectors on the board for simultaneous charging of 6 batteries. Next to each connector there are 2 levers to change the maximum voltage of 1S battery (4.2V regular, 4.35V for LiHV batteries) and maximum current 0.2 or 0.6A. The kit comes with 4 adapters from PH2.0 to JST and JST-DS (Molex 51005).

For input voltage there is DC In input on the board for power supply connection (12V/ 3A recommended) or XT60 connector for 2 ~ 6S LiPo battery connection.

• Input voltage:
  • DC In: 6 - 26V (12V/3A recommended)
  • XT60: 6- 26V 2-6S LiPo
• Outputs:
  • 6 x Micro JST 1.25 / JST-PH 2.0 (switchable 4.2/4.35V and 0.2/0.6A)
  • USB: 5V / 2.4A
• Digital display:
  • "INP" = total input voltage
  • "USB" = USB output voltage
  • "CH1" ... "CH6" = output voltage of ports 1-6
• LED indication:
  • LED blinking: no battery is connected
  • LED on: charging in progress
  • LED off: charging completed
• Dimensions: 80 x 50 x 15mm
• Weight: 31g

• Do not use 4.35V to charge 4.2V LiPo batteries. 4.35V is only applicable to 1S LiHV batteries
• Each port only supports one battery charging at a time
• If you have enough time, it is recommended to use 0.2A to charge the batteries
• Never charge batteries unattended

• 1 x AKK 1S LiPo/LiHV charger
• 4 x JST-PH 2.0 to JST and JST-DS adapter (Molex 51005)