SpeedyBee BT Nano 3 is a wireless Bluetooth module from the SpeedyBee brand that allows you to easily control your flight controller settings via the SpeedyBee App. The module automatically detects the controller's "armed/disarmed" status to disable Bluetooth during flight to prevent various interference and interference with the hardware signal.
Features
Fully wireless flight controller flight setup
Automatically disarm Bluetooth, to avoid interference
Password protection
Compact Nano size, lightweight and easy to install
Features
Operating voltage: 5V
Operating current: max up to 87 mA (5V)
Bluetooth: Supported (low power consumption)
Wi-Fi: Supported. Enabled automatically only when the firmware of the module itself is updated.
Port: UART
Flow rate: 115200
Bluetooth auto disable function: Enabled by default, the module automatically detects the "armed/disarmed" status. While the drone is flying, the Bluetooth function will be disabled so that the Bluetooth signal will not interfere with other wireless devices.
BT Switch Pad function: The Bluetooth function will be disabled when low signal strength is received. Refer to the BT Switch manual section for detailed instructions.
Power Indicator:
Continuous red: indicates that power is being supplied to the module.
Operating status indicator:
Flashing white: indicates abnormal UART to FC communication, check for proper connection and settings.
Continuous white: indicates that the communication with the flyer is normal, you can use the application to configure the wireless network settings.
Flashing green: indicates that the wireless signal is connected.
Solid green: indicates a successful connection to the application.
Brand: SpeedyBeeSKU 17009
Reviews and discussions
Registration