• Home
• Store
• Electronic FPV components
• OSD and telemetry

-0%

×

SpeedyBee Adapter 3 WiFi/Bluetooth adapter

Price:1 460 uah with VATPrice in USD:35.00

Bonuses will be issued for this product upon purchase

Read more

Brand: SpeedyBeeSKU 16416

Out of stock

Notify when available

Description

The third generation of the useful adapter from SpeedyBee! Configure, charge, test, analyze, flash, whatever, the SpeedyBee Adapter 3 can handle any task, and there's no need for a laptop, everything can be set up with your smartphone. With so many features, this adapter will become an indispensable tool in your FPV outfit.

Turn your smartphone into a mobile FPV companion. Connect to the SpeedyBee mobile app and customize your flight controller anytime, anywhere. Or install the latest version of Betaflight/Emuflight/INAV just 2 minutes before your flight!

Analyzing Blackbox data has never been easier. No laptop, separate app or other hassle required. Connect your quadcopter to the SpeedyBee mobile app and analyze your Blackbox* data (only supports Betaflight and Emuflight for now) just 1.5 minutes after flight.

Change your BLHeli_S speed controller settings or update firmware anytime, anywhere. Broken motor? Solder it in, pull out your smartphone and adjust the direction of travel wirelessly using the SpeedyBee app. BLHeli_32 and BLHeli_S regulators are now supported.

Your LiPo batteries = powerful 30W paver banks. Connect the SpeedyBee 3 adapter to a 2-6S LiPo battery and charge your cell phone or tablet when you need it most. Supports basic QC3.0/AFC/Apple 2.4A (iPhone 6S and above) and other fast charging protocols with power up to 30W. The adapter is equipped with overcurrent protection, short circuit protection and overheat protection to protect your gadgets from failure.

Forgot your LiPo tester? No problem plug in the 1-6S LiPo and the display will immediately show the battery voltage and remaining charge with a specific color code: GREEN (over 80%), WHITE (40-80%) and RED (less than 40%). Plus, the built-in audible alarm will alert you if the remaining charge is less than 40% to extend battery life.

Micro-USB or Type-C, Why not both? The SpeedyBee 3 adapter comes with a dual connector data cable, with MicroUSB 2.0 and USB 3.0 Type-C connectors on each end. No more worrying about connector compatibility, no matter what flight controller you're using in your build.

WiFi + Bluetooth = get the best of both worlds. Use Bluetooth for quick access to the firmware configurator, or switch to WiFi to download firmware or upload Blackbox data at faster speeds.

Features

• Wireless flashing and firmware configurator
• 30W fast USB charger
• Wireless Blackbox analyzer
• Wireless ESC Flasher
• 1-6S LiPo Tester
• Compatible with iOS and Android
• USB-C and Micro-USB interfaces

Features

• Input Voltage: 1-6S (3.8V+ for 1S)
• Power Connectors: XT60-Male, PH2.0 Male
• Required mobile device system version:
  • Android 7.0+
  • iOS 12.0+
• Supported version of SpeedyBee App
  • V1.6.1+ for iOS
  • V1.5.6+ for Android
• Maximum output current for flight controllers: 700mA at 5V
• Output interface for fast charging: USB A port
• Minimum input voltage for charging: 7.4V (2S LiPo)
• Supported fast charging protocol: QC3.0/QC2.0, AFC, FCP, SCP/High SCP, PE2.0/PE1.1, SFCP
• Maximum fast charging current: 3.5A
• Maximum fast charging power: 30W
• Case Material: ABS + PC
• Cable length: 12.4cm
• Size: 24.8 x 21.8 x 53.6mm
• Weight: 35g

Difference between SpeedyBee Adapter V2 and V3

Files

• Руководство пользователя SpeedyBee Adapter 3 на английском языке

Photos