ThePine64 PINECIL BB2 is a mini portable smart soldering iron with a 32-bit RISC-V SoC processor, featuring sleek design, automatic standby and heats up to operating temperature in just 12 seconds!
Note: The maximum input voltage is 21V, so 6S LiPo batteries cannot be connected!
Features
Dual power input design:
USB-C supports both PD and QC 3.0
DC5525 cylindrical type DC socket
Fast warm-up: reaches operating temperature in 12 seconds. Supports fast heating function
Adjustable soldering iron blade temperature, which can be set from 100°C to 400°C with adjustment buttons and easy-to-read OLED display
Portability: the soldering iron has a sleek and slim design consisting of an SAE 304 stainless steel core encased in a polycarbonate housing
Automatic standby mode turns on when the soldering iron is not in use, ensuring safe operation
Compatible with MINI TS100, SEQURE SQ-001 soldering irons.
Features
Power: 65W
Operating System: IronOS by Ralim
Chipset: GigaDevice GD32VF103TB
Processor: 32-bit RV32IMAC RISC-V "Bumblebee Core" at 108MHz
Display: 0.69 inch monochrome OLED, 96x16pxInternal Flash Memory: 128Kb
System memory: 32Kb SRAM
Output temperature: 100-400°C
Power Ports:
USB type-C: PD and QC 3.0 12V-20V 3A
Barrel Jack: DC5525, 12V-21V DC 3A
Stinger: B2
Stinger Length: 106mm
Dimensions: 170mm with stinger / 98mm without stinger x 12.8 x 16.2mm
Weight: 30g with stinger / 20g without stinger
Accessories
1 x Pinecil BB2 soldering iron
1 x soldering iron type TS-B2
Operating instructions
It is controlled by 2 buttons A and B. All information is shown on the display
When the power supply is connected, the soldering iron waits for your command and asks you to press button A (closer to the stinger). If you press it, it will automatically heat up the soldering iron to 300°C (default temperature).
If you press the right button B for a long time, the soldering iron will switch to the temperature measurement mode, the display will show the room temperature and the stinger will not heat up. It is from this mode, at room temperature, that you can switch to the soldering iron calibration mode by pressing both buttons simultaneously. If you attempt to calibrate a hot soldering iron, the display will show an error icon
Press and hold either button to set the desired temperature and the operating temperature will instantly rise or fall to the set temperature.
Heating from 0 to 300°C takes only 12 seconds at 21 volts.
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: PINE64SKU 16423
Reviews and discussions
There are no messages yet. Leave your message first.
Registration