• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

Matek F411-WSE flight controller for flying wing

Price:1 981 uah with VATPrice in USD:47.50

Bonuses will be issued for this product upon purchase

Read more

Brand: MatekSKU 14222

Archival goods

This item is no longer supplied

Description

The Matek F411-WSE flight controller is an even smaller version of the Matek F405-WING and Matek F411-WING flight controllers.

The size is now a tiny 28 x 28 x 14mm, so the controller can fit in almost any size flying wing. This flight controller is suitable for small wings with limited space for mounting electronics.

The kit and functionality is identical to the larger versions, with a few exceptions. A full table of differences can be seen in the photo below.

Main differences from Matek F405-WING

• No Blackbox logging to SD card
• No 12V BEC
• 5V BEC with 3A current (F405-WING has 5V BEC for 5A)
• 2 x UART ports (F405-WING has 6)
• 1 x I2C port (F405-WING has 2)
• 2 x Softserial (F405-WING has 1)
• Smaller current sensor (78A vs. 104A)
• Less current consumption 200mA per 3.3V BEC (F405-WING has 300mA)

Major differences from Matek F411-WING

• 4 servo outputs (F411-WING has 5)
• Switchable inputs for two cameras
• RSSI: available
• 2 x Softserial (F411-WING has 1)
• Voltage divider for analog Airspeed sensor: yes
• BEC Vx output for servos with 5V voltage, extendable up to 6V.

Features

• MCU: STM32F411 100MHz
• Accelerometer / Gyroscope: MPU6000 (SPI)
• Barometer: BMP280 (I2C)
• OSD: INAV OSD with AT7456E chip
• Blackbox: no
• UART outputs: 2
• Motor outputs: 2
• Servo outputs: 4
• I2C ports: 1
• ADC: 4 (VBAT, Current, RSSI, AirSpeed)
• 3 x LEDs for FC STATUS (blue, red) and 3.3V BEC indicator (red)
• Softserial-TX: 2
• Switched inputs for two cameras: yes
• TR / SA VTX control: Yes
• WS2812 LED control: Yes
• Beeper output: Check
• RSSI: Check
• Voltage divider for analog Airspeed sensor: Yes
• Firmware: iNAV
• Target: MATEKF411SE
• Mounting: 24 x 24 mm, hole diameter 2mm
• Dimensions: 28 x 28 x 14mm
• Weight: 8.5

PDB

• Input voltage range: 6.5 ~ 30V (2 ~ 6S LiPo) with TVS protection
• Outputs for ESC: 2
• Voltmeter scale: 1:10 (1100 scale)
• Current sensor: 78A, 3.3V ADC, scale 423
• BEC 5V output
  • Designed for flight controller, receiver, OSD, FPV camera, buzzer, 2812 LED module, GPS, AirSpeed module
  • Continuous current: 2A, max. 3A (5 sec / min)
• BEC Vx output
  • Designed for servo drives
  • Adjustable voltage: 5V by default, 6V by jumper
  • Continuous current: 3.5A, max. 5A (5 sec/min)
• BEC output 3.3V
  • Designed for Baro / Compass / OLED and Spektrum RX modules
  • Linear regulator
  • Continuous current: 200mA

Files

• Руководство пользователя Matek F411-WSE на английском языке

Photos