A very lightweight camera mount that provides dual-axis stabilization of the camcorder when flying on multi-rotor systems such as quadcopters and others.
Features
Assembled and debugged suspension ready to fly
Simple and stable CNC aluminum frame
Super lightweight construction design
2208 motor
Anti-vibration rubbers to absorb micro-vibrations
BGC3.1 suspension controller
Power connection via 3S LiPo battery balancing connector (cable for regular power connector included)
Suitable for GoPro 4, 3, 2 and other action cameras of similar size (camera weight 50-120g)
Features
Power supply: 7.4-11.1V
Current Consumption: 150mA
Height: 95mm
Color: silver
Weight: 160g / 235g (weight with GoPro 3 camera)
How to set up
Press once button on the controller to calibrate the accelerometer
Press the button on the controller twice to calibrate the gyroscope
Press the button on the controller three times to memorize the current position and hold the default position.
Use SimpleBGC GUI-2.2 program, which can be downloaded from the link below.
Attention! It is not allowed to update or re-flash the firmware in the controller, it may cause the device to become inoperable.
Attention
Balance the camera so that in the free position without power supply the camera stays on the suspension level and balanced
Do not apply power to the suspension without the camera installed, the suspension will not operate properly
Do not apply power unless the camera and the mount are level.
Do not touch the controller's output connectors after applying power, it may damage the controller.
Reviews and discussions
Registration