TheiFlight SucceX 60A Plus is a 32-bit speed controller designed to provide smooth motor operation with high stability and durability. The STM32F051 32-bit 48MHz processor and 10pcs TDK MLCC capacitors with a total capacitance of 220uF with low ESR ensure faster response speed.
Compact size of 30mm x 17mm and rational layout design with extended solder pads for soldering ensure easy installation on quadcopter. Powerful performance will bring the desired results!
Features
Supports 2-6S LiPo input voltage
STM32F051 32-bit 48MHz processor
Powerful current of 60A and up to 75A peak current
6-layer copper PCB on 4oz, better working load
10 pieces TDK MLCC capacitors total capacitance 220uF with low ESR, low ripple
High quality IRF7480 MOSFET transistors
2 x 0603 LEDs to indicate ESC operation
Rational layout, large solder pads, semicircular holes ensure uniform power supply to each PCB layer
Support current sensor, telemetry, active braking, motor timing
Optional heatsink effectively dissipates heat from the MOSFETs, protecting critical parts of the ESC from overheating (optional)
To ensure the longevity of the ESC, you should solder a capacitor of at least 220uF 35V for 4-5S or 50V for 6S to the power supply
Warning. When using disk-type motors, such as iFlight Tachyon T4114 or T4214 iFlight Tachyon motors, on your X-Class racing drone, you must disable "Brake On Stop" and "Auto Motor Timing" in BLHeli Suite. Recommended capacitors: minimum 1000uF 50V
Accessories
1 x iFlightSucceX 60A Plus ESC
1 x 35V 220uF capacitor
1 x set of power and signal cables
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: iFlightSKU 14664
Reviews and discussions
There are no messages yet. Leave your message first.
Registration