Racing FPV quadcopter iFlight Nazgul Evoque F5X Analog

Name: Racing FPV quadcopter iFlight Nazgul Evoque F5X Analog [6S LiPo. PNP]
Brand: iFlight
SKU: 16542
Price: 14171 UAH
Availability: OutOfStock
Rating: 4.8 (30 reviews)

Price:14 171 uahPrice in USD:335.00

Brand: iFlightSKU 16542

6S LiPo. PNP

Out of stock

Notify when available

Description

TheiFlight Nazgul Evoque F5X Analog is the result of the latest approach to building ready-to-fly FPV drones! The rugged carbon fiber frame with fully protected state-of-the-art electronics, unique aerodynamic design combined with an extraordinary LED design are all designed to ensure that FPV pilots can fully enjoy using the new Nazgul Evoque from the first second!

The lightweight molded side panels not only look amazing, but also protect the electronics from moisture, potential hazardous impacts and debris. Along each panel is an LED tube with an RGB light-guide connected to it, making your drone look bright and unusual at any time of day. The bottom LED indicates the battery voltage, a quick check gives you a hint of the remaining voltage.

360-degree illumination day and night. Perhaps the best looking BNF, but also practical. Bottom LED indicates battery voltage, quick check gives you a hint of remaining voltage; Never take off with a dead battery again. Installed LED wires in the side panels and bottom of the levers are also illuminated and will give you style on your next night race.

The XT60's secure integrated battery connector is as safe and sturdy as can be! No more dangling connectors that can be damaged in flight! iFlight has found a solution in the form of an integrated XT60 connector on the rear panel.

Installed and customized high performance electronics is the iFlight BLITZ Mini F7 flight stack with a state-of-the-art USB Type-C connector, 16Mb flash memory and 5 UART outputs for any additional hardware.High currents are supported by iFlight BLITZ Mini E55 speed controller equipped with efficient field-effect transistors and a whole set of SMD capacitors to filter possible noise from the motors (in addition to a pre-installed capacitor on the battery lead).

The drone features XING-E Pro motors with a one-piece aluminum housing, 5mm thick steel shaft, heavy-duty NSK bearings, slotted center magnets for better response and smaller air gap for higher magnetic flux with increased performance and efficiency.

SucceX Force analog video transmitter with stable output power up to 600mW and fast frequency sync without interfering with other pilots when powering up the quadcopter. Built-in VTX telemetry as well as electrical interference filters for any possible noise.

Note:

PNP version means a receiver for radio equipment is NOT included in the kit
Batteries, GoPro and GoPro case pictured are NOT included in the kit
3D printing color may vary from those pictured (may be yellow, pink, navy, green or black and green).
iFlight is constantly making changes to the design and components, so different sources may give different information. The information we have here is up to date for the current delivery. Information may change in the future!

Features

Form factor: compressed-X
Tower height: 28mm
Beam thickness: 6mm
Bottom plate thickness: 2.5mm
Top plate thickness: 2mm
Top (middle) plate thickness: 3mm
Motors: iFlight XING-E Pro 2207
- 6S LiPo version: 1800KV
Propellers: Nazgul F5
Overall dimensions: 166 x 139mm (body size)
Weight: 392.6g (without battery and GoPro mount)

Flight Controller iFlight BLITZ Mini F7 V1.1

Processor: STM32 F722
Gyroscope: BMI270
Barometer: DPS310
OSD: AT7456E
BEC: 5V 2.5A
Black Box: 16Mb
UART outputs: 5 (UART1, UART2, UART3, UART4, UART6)
- UART1 for analog or digital VTX
- UART2 for receiver
- UART3, UART4 for GPS or other sensors that require a serial port
- UART6 for ESC telemetry
I2C: 1
SH1.0 9-pin connector: for HD VTX/analog VTX and cameraf(5V/BAT/G/V/VO/T1/R1/5V/G/VI)
SH1.0 8-pin connector: for ESC (R6/CUR/M4/M3/M2/M1/BAT/G)
SH1.0 6-pin connector: for any receiver or DJI (3V3/R2/5V /G/R2/T2)
SH1.0 4-pin connector: GPS (T4/R4/G/5V)
SH1.0 4-pin LED&Beeper connector (BUZ/LED/G/5V)
FC status LED indication:
- 3.3V - red
- Start - blue
- 5V - green
- BAT - orange
Supported VTX protocol: Smartaudio and IRCTramp
Support WS2812 LED modules: yes
Support squeaker：yes
Firmware： BetaFlight
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mounting holes： 20 x 20mm, φ4mm
Dimensions: 30.5 x 27mm
Weight: 5g