HGLRC Forward 60A BLHeli_32 3-6S LiPo 4-in-1 Speed Controller

TheHGLRC Forward 60A is a 4-in-1 high-performance speed controller based on a 32-bit STM32F051 processor with an increased frequency up to 48MHz, which supports DShot protocol up to version 1200.

• Advanced 32-bit STM32F051 processor with operating frequency up to 48MHz
• BLHeli_32 firmware with support for DShot 1200/600/300/150 and Oneshot 125/42 protocols
• Integrated heatsink with shielding and heat dissipation functions
• High-tech design. Gold-plated board, resistant to overheating and overcurrent
• Quality Toshiba transistors and ceramic capacitors
• Comes with Sanyo 35V 1000uF capacitor to filter incoming voltage

• Input Voltage: 3-6S Lipo
• Processor: STM32F051 48MHz
• DC current: 60A
• Peak current: 65A (10 seconds)
• BEC: NO
• Firmware: BLHeli_32
• Supported protocols: DShot 1200/600/300/150, Oneshot 125/42
• Mounting Diagram: 30.5 x 30.5mm, M3
• Size: 45 x 40 x 6.5mm
• Weight: 18g

• 1 x HGLRC Forward 60A ESC 4-in-1 Speed Controller
• 1 x XT60H connector
• 1 x 10cm 12AWG silicone wire
• 1 x Sanyo 35V 1000uF capacitor
• 1 x JST SH1.0 8-pin 60mm cable
• 1 x set of absorbent silicone spacers