• Home
• Store
• Electronic FPV components
• GPS and sensors

-0%

×

GPS module RushFPV GNSS PRO with compass 5883

Price:693 uah with VATPrice in USD:16.45

Bonuses will be issued for this product upon purchase

Read more

Brand: RushFPVSKU 17900

In stock:

Buy

You can buy this item with delivery in Ukraine

This item is available for order by legal entities for paying non-cash and includes VAT.

Out of stockExpected soon

Notify when available

Description

GPS GNSS PRO module from RushFPV with built-in compass HMC5883. This model uses GNSS u-blox M10, capable of supporting GPS, BDS, GLONASS, GALILEO navigation systems. RushFPV GNSS PRO can be connected to three navigation systems simultaneously with a refresh rate of up to 10 Hz. This full-featured navigation module is perfect for medium and large drones during long-distance FPV flights.

Features.

• New u-blox M10 chip
• Built-in electronic compass HMC5883
• Supports GPS, BDS, GLONASS and GALILEO
• Simultaneous support for 3 navigation systems
• Backup battery and memory
• Quick start function
• Ultra-thin and lightweight antenna

Features

• GNSS u-blox M10
• HMC5883 compass
• Reception ranges: GPSL 1, GLONASSL 1, BDSB 1, GALILEO E1, SBAS L1, QZSS L1
• Number of channels for reception: 72
• Reception sensitivity: -162 dBm
• Output protocol: UBX/NMEA
• Data rate: 115200 dps
• Output refresh rate: 1 Hz - 10 Hz
• Input power: 5 V, 30 mA
• Speed accuracy: 0.05 m/s
• Positioning accuracy: 2D ACC 1.5m
• Maximum working height: 50 km
• Maximum travel speed: 500 m/s
• Dimensions: 25x25x4.8 mm
• Weight: 6.9 g

Package contents.

• 1 x RushFPV GNSS PRO GPS module

Recommendations.

• Keep the ceramic antenna as far away from metal and carbon parts as possible. For the best signal reception, mount the GNSS antenna in a free space with a bracket, as far away from the VTX, R/C receiver and antennas as possible.
• When connecting to a flight control system, connect the GNSS RX module to the flight control system TX and the TX module to the flight control system RX.
• The antenna is very sensitive and should not be hit or dropped.
• The engraving/marks on the ceramic antenna are the result of manual fine-tuning of the center frequency to improve the antenna performance and are not a product defect.

Photos