• Home
• Store
• Frames and components
• Multi-rotor frames

-0%

×

GEPRC GEP-LC7 HD Crocodile 315mm Carbon Frame

Price:2 506 uah with VATPrice in USD:59.95

Bonuses will be issued for this product upon purchase

Read more

Brand: GepRCSKU 16280

• Рама GEP-LC7HD Crocodile

Select the option!

Out of stock

Notify when available

Description

TheGEPRC GEP-LC7 HD Crocodile is a 7" frame designed for long distance flying. The large 315mm size provides stability for long flights. The frame is compatible with both 6" and 7" propellers.

Compared to the regular GEP-LC7, the GEP-LC7 HD tower is more elongated, specifically for mounting a digital DJI system.

FPV camera, antennas and GPS are mounted with TPU plastic components. The mounting hole for the GPS is designed to be 22mm x 20mm. The tower has a lot of space for mounting electronic components. The frame is highly durable and comes with 5mm beams.

Features

• Suitable for long distance flying
• Suitable for installing DJI digital system
• Plenty of accessories
• Camera and antenna are fixed and protected with TPU plastic components
• Durable and strong 3K carbon fiber, 5mm beams and plates
• Independent GPS mounting position, special tilt design, stronger signal
• Plenty of space for electronic components

Features

• Frame size on motor axes: 315mm
• Beam thickness: 5mm
• Top plate: 2.5mm
• Bottom plate: 2.5mm
• Mounting scheme for motors: 16 x 19mm
• Mounting scheme for stack : 30.5 x 30.5mm
• Camera mount width: 19mm
• Weight: 174g

Recommendations

• Flight controller : F7 / F4 / F3 / Kiss / RF
• Motors: 2207 - 1500~1700KV / 2306 - 1500~1700KV / 2407 - 1300~1700KV
• ESC: 40A-60A
• Propeller: 6~7 inches
• Battery: 6S 2200mAh ~ 6S 2600mAh

Accessories

• 1 x 3D TPU protection for FPV camera
• 1 x 3D TPU antenna protection, GPS protection
• 1 x 2.5mm top plate
• 1 x 2.5mm bottom plate
• 4 x 5mm beams
• 1 x 2.5mm small front plate
• 1 x 2.5 mm small back plate
• 8 x M3 red nut
• 6 x M3 x 25mm aluminum alloy screw
• 4 x M3 x 12 YFS screw
• 6 x M3 x 8 YFS screw
• 4 x M3 x 10 flat screw
• 6 x M3 x 14 flat screw
• 8 x nut
• 2 x GEPRC Velcro
• 8 x seating feet
• 2 x sponge
• 2 x fixing tubes for 2.4G antennas

Photos