The Mark1 carbon frame from GEPRC, measuring 210mm on the axes, has a non-symmetrical beam structure and an unusual design. The interchangeable beams are curved towards the center, with only three holes at the ends of the beams for motor mounts. The tower frame is very easy to assemble, the 3mm thick top plate makes it even more colorfast, and thanks to the large number of connectors on it, will help you easily install any action cameras.
GEP-Mark1 is an original solution for both freestyle and FPV racing.
Features
High-quality and strong 3K carbon fiber frame, has strong 4mm beams, as well as strong 3mm turret top plate.
Unique beam and turret design, engineered specifically to reduce air resistance.
Motor mounting location has only 3 screw holes.
35mm space in the center of the frame, to easily accommodate a variety of sizes of electronic components.
Frame size 210mm on the axes, for 5 inch propellers and powerful motors from 2300KV.
The X-shaped frame geometry with 90 degrees apart gives excellent responsiveness in control.
The frame also has a lowered center of gravity, due to the installation of the battery at the bottom of the frame, which makes it more stable in flight.
Good package with power wiring board (with 5V and 12V plugs), integrated XT60 connector, branded Velcro for the battery.
Comes with LED module with integrated buzzer.
Features
Frame material: 3K carbon fiber
Frame Axis Size: 210 mm
Strut material: aluminum
Beam thickness: 4mm
Side plates: 2mm
Top plate: 3mm
Other plates: 1.5mm
Weight: 102g
Recommendations
Propeller size: 5 inches
Battery: 3S 1300mAh - 4S 1300mAh
ESC: 20A-30A
Motors: 2204/2205/2206/2305
Flight Controller: F3 / Naze32 / CC3D
Note: Course camera and boards only as a demonstration of the overall assembly.
Brand: GepRCSKU 11304
Reviews and discussions
There are no messages yet. Leave your message first.
Registration