× Racing FPV quadcopter iFlight Titan XL5 Analog 250mm 4S/6S PNP Price:10 450 uah with VAT Price in USD:249.99 Bonuses will be issued for this product upon purchase
Read more Select the option!
Description Ready to fly FPV drone iFlight Titan XL5 Analog 250mm for racing or freestyle flights over long distances.
The quadrocopter comes in two versions for 4S or 6S batteries, which differ in motor speeds: 4S - 2450KV, 6S - 1800KV.
Features
iFlight Titan XL5 carbon fiber frame with 6mm thick beams for greater durability
Powerful iFlight Xing 2208 DC motors
iFlight SucceX-E F4 V2.1 flight stack, with 4-in-1 SucceX-E 45A speed controlleriFlight SucceX Force video transmitter with power up to 800mW
FPV camera Caddx Ratel with excellent analog image quality both in the daytime and in the dark time of day
Protective parts made of TPU plastic
Motor wires are protected by plastic channels
GPS is pre-installed and GPS-rescure mode is configured and just needs to be enabled in the Betaflight configurator. How to enable GPS-rescure?
The drone is fully configured and tested from the manufacturer
Note:
Angle-Mode (self-balancing mode) is enabled by default so that the first flight doesn't end in a crash. How do I switch Angle Mode to Acro Mode?
By default, the motors power is set to 70% of throttle limit. If more power is needed, simply enable 100% in the Betaflight configurator
PNP version means that there is no receiver for radio equipment in the kit
The action camera and camera mount shown in the photo are not included in the kit.
Features
Features iFlight Titan XL5 frame
Frame size by motor axes: 250mm
Beam thickness: 6mm
Bottom plate thickness: 2mm
Top plate thickness: 2mm
Side plates thickness: 2mm (2.5mm including TPU spacers)
Rack height: 30mm
Size: 185 x 133mm
Weight: 145g
Xing 2208 Motor Specifications
RPM per volt:
4S version: 2450KV
Version 6S: 1800KV
Specifications of iFlight SucceX-E F4
Processor ： STM32F405
Gyroscope： MPU6000
Betaflight OSD： AT7456E
BlackBox： 8mb
Input Voltage： 2-6S LiPo (max 8S 50V)
PWM Outputs: 4
UART outputs: 4 （1, 2, 3, 6)
ESC outputs: 8
VTX protocol: is （IRC Tramp）
WS2812 LED strip: supported
Squeaker： supported
BEC: 5V / 2.5A
Firmware： betaflight_4.0.5_BETAFLIGHTF4.hex
Target： IFRC/IFF4_TWIN_G(STM32F405)
Mounting holes: 30.5 x 30.5mm, φ4mm, with φ3mm dampers
Dimensions: 36 x 36mm
Weight: 7.6g
ESC 4-in-1 iFlight SucceX-E 45A Features
Constant current: 45A
Peak current: 55A
Voltage support: 2-6S LiPo
Processor: STM32F051, 48Mhz
Current Sensor: Yes
WEIGHT: no
Firmware: BLHeli_S
Protocols: DShot 150/300/600, MultiShot, OneShot
Target: G-H-30 BLS 16.7
Mounting holes: 30.5 x 30.5mm, φ4mm, with dampers φ3mm
Dimensions: 40 x 43mm
Weight: 14.4g
Specifications VTX iFlight SucceX Force
Frequency: 5.8G
Power: Pit mode / 25mW / 100mW / 400mWt / 800mW (25mW by default)
No. of channels: 40
Built-in output power self-test function: Yes
Video format: NTSC / PAL
Input voltage: 7V - 36V
Current Consumption: 12V / 380mA at 800mW
Size: 36 x 36 x 3mm
Weight: 7.2g
Features of Caddx Ratel FPV Camera
Matrix: 1/1.8" CMOS Starlight HDR
Horizontal resolution: 1200TVL
Image format: 16:9 / 4:3 (variable)
TV system: NTSC & PAL (variable)
WDR: Super WDR (HDR)
Min. illumination: 0.0001 lux Starlight
Synchronization: Internal
Minimum Latency: 8 ms
Shutter Speed: PAL: 1/50 ~ 100,000; NTSC: 1/60 ~ 100,000
Signal to noise ratio: > 60 dB (AGC OFF)
DNR: 3-DNR
OSD: Yes
Video output: CVBS
Power: 5-40V
Dimensions: 19 x 19 x 19mm
Weight: 8g
Recommendations
Batteries:
4S version: 1300-1800mAh
6S version: 1100-1350mAh
Accessories
1 x iFlight Titan XL5 Analog PNP ready quadcopter (4S/6S optional)
2 x iFlight Nazgul 5140 propeller kit
1 x wire set
2 x anti-slip mats
2 x iFlight Velcro
1 x 5.8G antenna
1 x protective tubes for receiver antennas
1 x Micro USB cable
1 x manuals and instructions
Brand: iFlightSKU 15581
Reviews and discussions
Через две недели будет поставка готовых квадров iFlight Nazgul5 Analog для 6S и 4S.
Registration