Flywoo GOKU 406S Mini 20 x 20 4-in-1 Flywoo speed controller with high power, in spades up to 50A and support for 6S batteries! Suitable for stacking with GOKU F722 Mini Dual flight controller.
NOTE: The manufacturer has removed the aluminum heatsink shown in the photo. ESCs are now produced without the heatsink!
Note: pay attention to the designation of 8Pin pins from left to right: GND, BAT, M1, M2, M3, M3, M4, CUR, TX. So when using this ESC with other brands FC, please make sure the connectors are compatible.
Features
High performance 32-bit processor supporting BLHeli_32 firmware with DShot 1200 protocol
Input voltage up to 6S LiPo
Small aluminum plate with glossy finish for protection and cooling
3oz copper pads, the "+" and "-" symbols are cut out on the pads for the power wires for clarity
The motor soldering pads have a 1.5mm diameter hole for inserting the wire inside before soldering to increase the wire retention strength and simplify soldering.
Features
Operating current: 40A
Peak current: 50A (10 seconds)
Input Voltage: 2-6S
Firmware: BLHeli_32
Support protocols: Oneshot, Multishot, DShot150/300/600/1200/1200
Current Sensor: Yes
Telemetry function: Yes
BEC output: no
Mounting holes: 20 x 20mm (M3)
Weight: 7. g
Accessories
1 x FLYWOO GOKU 406S 40A 4 in 1 speed controller
1 x set of damping spacers
1 x cable for connection to FLYWOO GOKU F722 Mini controller
1 x capacitor 470uF 35V
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: FLYWOOSKU 15113
Reviews and discussions
There are no messages yet. Leave your message first.
Registration