FlyMod presents a universal charger of its own design and manufacture, the unique feature of which is to work with batteries using only the balancing port of the battery, so that the charging process is simple without unnecessary manipulations.
It is enough to connect the balancing port of the battery to be charged on one side and a capacitive battery or power supply on the other side, select the mode of operation, the amount of current and press start. When the process is complete, the charger will go into standby mode and beep.
Now FPV pilots don't have to carry a powerbank with them on flights, you can connect any LiPo battery to the device and charge your smartphone from the USB port, which is located on the end of the device. The USB port becomes active when the power connector of the battery is plugged in.
Features
Automatic cell count detection, start operation by pressing just one button after connecting the balancing connector.
Visual display of the cell balancing process. The screen displays icons which cells are being balanced, which gives an indication of the battery status.
Function of automatic start of the charging process or storage mode. All you need to do is just plug in the balancing connector, and the charger will do the rest. The function is deactivatable, to activate or deactivate in the on state you need to hold the "stop" button for 4 seconds.
Capacity calculation during charging separately for each cell. At the end of the charge will display statistics with information on how many milliampere-hours have been poured into each cell.
Charge 2-4S LiPo batteries with cell balancing. Charging current up to 2A is adjustable.
Discharge 2-4S LiPo batteries with current up to 1A, discharge power up to 17W.
Transfer of 2-4S LiPo batteries into storage mode with voltage 3.85V on each cell.
The charger can work as a battery condition tester, operating only from the balancing connector without external power supply.
Automatic battery recovery mode, draws low current on severely discharged cells (If more than 1V per cell is present).
Display with indication of parameters and values. Voltage measurement digit capacity per cell up to 1 millivolt.
Ability to simultaneously charge up to 4 LiPo batteries using an expansion board (available separately).
5V USB port for charging a smartphone or other equipment from a battery connected to the XT60.
Intelligent active cooling with a built-in cooler that activates when the charger reaches a certain temperature.
MicroUSB connector for updating the device firmware.
Compact size and light weight.
Simple operation of the charger is controlled by two buttons on the front panel:
The left button is responsible for changing the mode of the device and stops the process if it is in progress.
The right button sets the required charging current with a short press and starts the selected process with a long press.
The mode of the device is determined by the name of the mode in the upper right corner, as well as by the color of the indicator in the form of the Flymod logo on the front panel of the device:
(green) CHARGE - battery charge up to 4.2V per cell.
(red) DISCHRG - battery discharge with maximum current of 1A.
(purple) STORAGE - puts the battery into storage mode with 3.85V per cell.
(blue) BALANCE\TESTER - cell balancing mode (When connected to the balancing port only, it works in tester mode, showing the voltage value on each cell).
The charger can simultaneously charge up to 4 LiPo rechargeable batteries using an expansion board (available separately). All these batteries must have the same number of cells and voltage value on each bank (0.2V variation is allowed).
The built-in cooler cools the internal elements that heat up during operation. When a certain temperature is reached, at which further operation poses a risk of overheating, the device will stop the process itself. It is recommended not to close the ventilation holes to avoid overheating.
All necessary information about the device can be found in the user manual supplied with the device.
We guarantee the quality of the product for one year from the date of purchase. The warranty only covers materials or operational defects that occur during operation of the product through no fault of the user. During this period you can contact FLYMOD service center for troubleshooting.
Features
Supported battery types: LiPo/LiIon
Number of battery cells: 2 - 4S
Input voltage: DC 11 - 18V (Recommended voltage is 15-18V, charging is less warm)
Input current: up to 4A
Display type: OLED
Case Material: ABS+ 3D printed plastic
Controls: two buttons
External connectors: XT60 power connector, 2-4S balancing connector, USB 5V 1.5A, microUSB port for firmware upgrade
Charge current: 0.5 to 2A in 0.1A increments
Discharge current: ~1A
Balancing current: ~1A per cell (when cells are equalized)
Voltage measurement range: 0.001V per cell
Charging power: 35W
Discharge power: up to 17W
Balancing: 2 - 4 cells
USB port voltage: 5V
USB port maximum current: 1.5A
Size: 110 x 77 x 29 mm
Weight: 142 g
Accessories
Charger
User Manual
Warning! Do not leave the batteries in the operating device unattended.
Григорий Кузнецов, Здравствуйте, нет не меряет. Технически используя только балансировочный разъем измерить адекватные значения сопротивление ячеек невозможно.
Brand: FlyModSKU 13337
Reviews and discussions
Долго... Нужно хотябы 5А для 4х
Registration